To view the poster program please click here

Wednesday (26.09.2018)

10:45
B05: Biomaterials Applications
B05.1: Bioactive, Antibacterial Surfaces and Coatings
Session starts at 10:45
Lecture
Smart Reinvention of Drug Delivery Systems with Graphene

Dr. Izabela Firkowska-Boden Dr. Matthias Arras Prof. Dr. Klaus D. Jandt Dr. Fuping Dong

S1/01 - A01
C05: Small Scale and In Situ Mechanical Testing
C05.1: Fracture I
Session starts at 10:45
Keynote Lecture
Understanding the fracture toughness for brittle and ductile materials at the microscale

Dr. Steffen Brinckmann

S1/01 - A03
C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI
Session starts at 10:45
Highlight Lecture
On the Assessment of Creep Damage Evolution in Nickel-Based Superalloys Through Correlative HR-EBSD and cECCI Studies

Sabin Sulzer Zhuangming Li Prof. Stefan Zaefferer Dr. Seyed Masood Hafez Haghighat Prof. Angus Wilkinson Prof. Dierk Raabe Prof. Roger Reed

S1/01 - A04
C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.1: Session 1
Session starts at 10:45
Lecture
Computational and Experimental Assessment of the Mechanical Behavior of Ductile Cast Iron at a Microstructural Scale

Prof. Dr. Roberto Boeri Dr. Diego Fernandino Prof. Dr. Juan Miguel Massone

S1/01 - A02
F01: High-Temperature Functional Materials
F01.1: Non-Metallic High-Temperature Materials
Session starts at 10:45
Keynote Lecture
Optical in-situ study of the redox processes in LiNbO3:Fe crystals

Ph.D. Dmytro Sugak Dr. Oleh Buryy Dr. Yuriy Suhak Dr. Yaroslav Zhydachevskyy Prof. Dr. Klaus-Dieter Becker Dr. Natalia Martynyuk Uliana Yakhnevych Prof. Dr. Sergii Ubizskii

S1/03 - 123
F04: Functional Materials for Energy Applications
F04.1: Session 1
Session starts at 10:45
Lecture
Synthesis and characterization of new composite ceramics based on gadolinium-doped ceria and magnesia nanoparticles

Jingying Yao Dr. Jens Zosel Dr. Wolfram Oelßner Prof. Dr. Michael Mertig

S1/03 - 223
M03: Microstructure Evolution in Applied Materials: Process to Property
M03.1: Metals General
Session starts at 10:45
Lecture
How small Nb additions improve toughness in quenched and tempered high strength Cr-Mo steels

Dr.-Ing. Hongcai Wang Dr. Christoph Somsen Dr. Suzana G. Fries Dr. Yujiao Li Dr. Eric Detemple Prof. Dr. Gunther Eggeler

S1/01 - A2
M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.1: Session 1
Session starts at 10:45
Keynote Lecture
Mesoscale Theory of Dislocations : from the Discrete to the Continuum

Dr. Alphonse Finel Dr. Pierre-Louis Valdenaire Dr. Yann Le Bouar Prof. Dr. Benoît Appolaire

S1/01 - A4
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.1: Session 1
Session starts at 10:45
Keynote Lecture
On the mixed conduction in yttria stabilized zirconia in high electric fields

Prof. Dr. Reiner Kirchheim

S1/03 - 283
P02: Additive Manufacturing Technologies and Materials
P02.1: Applications
Session starts at 10:45
Keynote Lecture
Innovative Aerospace and Space Structures made by Additive Manufacturing

Prof. Dr. Christoph Leyens Prof. Dr. Frank Brückner Dr.-Ing. Elena Lopez Dipl.-Ing. André Seidel Mirko Riede

S1/03 - 221
P04: Nanocomposites and Nanolaminated Functional Coatings
P04.1: Ternary Alloys and Nanolaminated Coatings
Session starts at 10:45
Keynote Lecture
Are nanostructured transition metal aluminium nitrides predictable? - Lessons learned from studying phase formation, elastic properties and fracture toughness

Prof. Jochen M. Schneider

S1/03 - 23
P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.1: Fundamentals of Atomic Layer Processing
Session starts at 10:45
Keynote Lecture
ALD - Ideal2Real

Prof. Ola Nilsen Dr. Henrik Sønsteby

S1/03 - 226
S05: Bulk Ultrafine- and Nano-Structured Materials
S05.1: Processing and Mechanical Properties
Session starts at 10:45
Keynote Lecture
Temperature and microstructure dependent mechanical properties of ultrafine-grained Chromium and Tungsten

Prof. Dr. Daniel Kiener Dr. Reinhard Fritz Dr. Alexander Leitner Dr. Verena Maier-Kiener

S1/01 - A3
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.1: Concerning the Cantor Alloy
Session starts at 10:45
Lecture
Characterization of high entropy alloy CrMnFeCoNi over a wide temperature range

Dipl.-Ing. Christian Gadelmeier Sebastian Haas Prof. Dr. Werner Skrotzki Mike Mosbacher Prof. Dr. Uwe Glatzel

S1/01 - A5
S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.1: Bulk Metallic Glasses and High-Entropy Alloys
Session starts at 10:45
Keynote Lecture
Recent Progress in Mechanical Properties of High-Entropy Alloys

Prof. Dr. Easo George

S1/01 - A1
11:00
B05: Biomaterials Applications
B05.1: Bioactive, Antibacterial Surfaces and Coatings
Session starts at 10:45
Lecture
In vitro methods for the evaluation of antimicrobial surface designs

Dr. Jelmer Sjollema Dr. Bas A.J. Zaat Prof. Veronique Fontaine Prof. Madeleine Ramstedt Dr. Karin Thevissen Dr. Reto Luginbuehl Dr. Jiuyi Li Prof. Henny C. van der Mei Prof. Henk J. Busscher

S1/01 - A01
C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI
Session starts at 10:45
Lecture
Defect Characterisation in MnAl-C Using EBSD and ECCI

Dr. Thomas George Woodcock Dr. Stefan Zaefferer

S1/01 - A04
C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.1: Session 1
Session starts at 10:45
Lecture
Damage accumulation in a press-fit contact under mechanical loading

Prof. Dr. Angelika Brückner-Foit Christoph Skotarek Konstantin Markstädter Prof. Dr. Adrian Rienäcker

S1/01 - A02
F04: Functional Materials for Energy Applications
F04.1: Session 1
Session starts at 10:45
Lecture
Impact of a high surface area on the defect chemistry of mesoporous ceria

Dr. Matthias T. Elm Kathrin Michel Dr. Christian Reitz Dr. Torsten Brezesinski

S1/03 - 223
M03: Microstructure Evolution in Applied Materials: Process to Property
M03.1: Metals General
Session starts at 10:45
Lecture
Improved data-driven predictive model of the tensile properties of thermo-mechanically-hot-rolled Nb-Ti-V-B micro-alloyed steels using artificial neural networks

Ali Hegazy Prof. Dr. M. Essam El-Dein El-Rafey Dr. Eman Fadl

S1/01 - A2
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.1: Concerning the Cantor Alloy
Session starts at 10:45
Lecture
Local texture in a swaged CrMnFeCoNi high-entropy alloy

Prof. Dr. Werner Skrotzki Aurimas Pukenas Prof. Dr. Guillaume Laplanche Prof. Dr. Easo George

S1/01 - A5
11:15
B05: Biomaterials Applications
B05.1: Bioactive, Antibacterial Surfaces and Coatings
Session starts at 10:45
Lecture
Development and characterization of bioactive and antibacterial surfaces for bone contact applications

Dr.-Ing. Martina Cazzola Prof. Dr. Seiji Yamaguchi Dr. Sara Ferraris Dr. Marta Miola Dr. Andrea Cochis Prof. Dr. Lia Rimondini Prof. Dr. Silvia Spriano Prof. Dr. Enrica Vernè

S1/01 - A01
C05: Small Scale and In Situ Mechanical Testing
C05.1: Fracture I
Session starts at 10:45
Lecture
Understanding elastic-plastic fracture at the micron scale by means of quantitative in-situ electron microscopy

Dipl.-Ing. Markus Alfreider Dr. Darjan Kozic Dr. Otmar Kolednik Dr. Daniel Kiener

S1/01 - A03
C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI
Session starts at 10:45
Lecture
Advanced high-resolution 3D EBSD

Tobias Volkenandt Dr. Fabián Pérez-Willard Dr. Michael Rauscher

S1/01 - A04
C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.1: Session 1
Session starts at 10:45
Lecture
Process-integrated residual stress induction on disc springs by means of incremental sheet metal forming technique

Ramin Hajavifard Fawad Maqbool Prof. Dr. Markus Bambach Prof. Dr. Frank Walther

S1/01 - A02
F01: High-Temperature Functional Materials
F01.1: Non-Metallic High-Temperature Materials
Session starts at 10:45
Keynote Lecture
Challenges in melt growth of high melting point oxide single crystals

Dr. Steffen Ganschow Dr. Detlef Klimm

S1/03 - 123
F04: Functional Materials for Energy Applications
F04.1: Session 1
Session starts at 10:45
Lecture
Epitaxial Mesoporous Thin Films for Solid Oxide Fuel Cells Cathodes

Dr. Matias Acosta Dr. Federico Baiutti Dr. Albert Tarancón Prof. Dr. Judith L. MacManus-Driscoll

S1/03 - 223
M03: Microstructure Evolution in Applied Materials: Process to Property
M03.1: Metals General
Session starts at 10:45
Lecture
Modelling the hot deformation behaviour of a Ti5553 alloy

Dipl.-Ing. Ricardo Henrique Buzolin Dr. Friedrich Krumphals Dr. Alfred Krumphals Dr. Martin Stockinger Dr. Sanjeev Kumar Prof. Dr. Cecilia Poletti

S1/01 - A2
M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.1: Session 1
Session starts at 10:45
Lecture
Multiphase-field model for solid state phase transformation processes including inelastic effects

Daniel Schneider Ephraim Schoof Felix Schwab Christoph Herrmann Dr. Michael Selzer Prof. Dr. Britta Nestler

S1/01 - A4
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.1: Session 1
Session starts at 10:45
Highlight Lecture
Mechanisms of Flash Sintering and Related Phenomena

Prof. Rishi Raj

S1/03 - 283
P02: Additive Manufacturing Technologies and Materials
P02.1: Applications
Session starts at 10:45
Highlight Lecture
Analysis and validation of a S-Band Helix Antenna Manufactured by Additive Manufacturing

Prof. Dr.-Ing. Fernando Lasagni Carlos Galleguillos Eduardo Lapeña Esteban Celemín

S1/03 - 221
P04: Nanocomposites and Nanolaminated Functional Coatings
P04.1: Ternary Alloys and Nanolaminated Coatings
Session starts at 10:45
Highlight Lecture
Vacancies as a key mechanism for tuning thermodynamic stability and mechanical properties of nitride-based superlattices

Nikola Koutná Dr. David Holec Rainer Hahn Dr. Jakub Zálešák Dr. Martin Friák Prof. Dr. Mojmír Šob Prof. Dr. Jozef Keckes Prof. Dr. Paul H. Mayrhofer

S1/03 - 23
P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.1: Fundamentals of Atomic Layer Processing
Session starts at 10:45
Highlight Lecture
Atomic-scale simulations of the mechanism of thermal atomic layer etch

Dr. Suresh Kondati Natarajan Dr. Simon D. Elliott

S1/03 - 226
S05: Bulk Ultrafine- and Nano-Structured Materials
S05.1: Processing and Mechanical Properties
Session starts at 10:45
Lecture
Microstructural optimization of Ag/Nanodiamond composites through ball milling and high pressure torsion

Dipl.-Ing. Andreas Katzensteiner Prof. Dr. Reinhard Pippan Dr. Andrea Bachmaier

S1/01 - A3
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.1: Concerning the Cantor Alloy
Session starts at 10:45
Lecture
Peculiarities in the deformation of CoCrFeMnNi at very low temperatures

Dipl.-Ing. Aditya Srinivasan Tirunilai Dr. Alexander Kauffmann Dr. Jan Sas Dr. Klaus-Peter Weiss Hans Chen Dr. Dorothée Vinga Szabó Dr. Sabine Schlabach Dr. David Geissler Prof. Dr. Jens Freudenberger Prof. Dr. Martin Heilmaier

S1/01 - A5
S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.1: Bulk Metallic Glasses and High-Entropy Alloys
Session starts at 10:45
Lecture
Influence of annealing on microstructure and mechanical properties of a nanocrystalline CrCoNi medium-entropy alloy

Karoline Kormout Anton Hohenwarter Bernhard Völker Karoline Kormout Benjamin Schuh

S1/01 - A1
11:30
B05: Biomaterials Applications
B05.1: Bioactive, Antibacterial Surfaces and Coatings
Session starts at 10:45
Lecture
Synergic antibacterial coatings combining titanium nanocolumns and tellurium nanorods

Dr. Jose Miguel Garcia-Martin Marcial Fernandez-Castro Dr. María Ujué González Prof. Thomas Webster William Tien-Street David Medina Dr. Ivan Fernandez

S1/01 - A01
C05: Small Scale and In Situ Mechanical Testing
C05.1: Fracture I
Session starts at 10:45
Lecture
Quantitive in situ TEM/SEM Nano/Microscale Fracture Tests on Cr

Dr. Inas Issa Markus Alfreider Dr. Anton Hohenwarter Prof. Dr. Daniel Kiener

S1/01 - A03
C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.1: Session 1
Session starts at 10:45
Lecture
Microstructural and fatigue assessment of thermal and mechanically aged austenitic AISI 347 power plant steel

Frankel Maci Michael Jamrozy Ruth Acosta Dr. Peter Starke Prof. Dr. Christian Boller Dr. Klaus Heckmann Dr. Jürgen Sievers Tim Schopf Prof. Dr. Frank Walther

S1/01 - A02
F04: Functional Materials for Energy Applications
F04.1: Session 1
Session starts at 10:45
Keynote Lecture
Surface reaction mechanisms and transport kinetics of perovskite mixed conducting oxide thin films

Dr. Markus Kubicek Dr. Edvinas Navickas Dr. Ghislain M. Rupp Dr. Andreas Nenning Dr. Alexander Opitz Prof. Herbert Hutter Prof. Jürgen Fleig

S1/03 - 223
M03: Microstructure Evolution in Applied Materials: Process to Property
M03.1: Metals General
Session starts at 10:45
Lecture
A phase-field study of the influence of volume fraction and elastic inhomogeneity on the microstructure evolution of Ni-base superalloys

Oussama Boualy Prof. Hassan Mharzi Prof. Mustafa Benyoucef Prof. Yann Le Bouar

S1/01 - A2
M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.1: Session 1
Session starts at 10:45
Lecture
Role of plasticity on the formation of acicular microstructures in metallic alloys

Prof. Benoit Appolaire Hocine Lebbad Prof. Dr. Yann Le Bouar Prof. Dr. Alphonse Finel

S1/01 - A4
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.1: Session 1
Session starts at 10:45
Lecture
Asymmetric temperature distribution during steady stage of flash sintering dense zirconia

Dr. Jinling Liu Guangxin Liu Dr. Dianguang Liu Dr. Yan Gao Prof. Dr. Linan An

S1/03 - 283
P02: Additive Manufacturing Technologies and Materials
P02.1: Applications
Session starts at 10:45
Lecture
Development of a hybrid process chain for material-efficient production of aerospace components

Dr.-Ing. Margarita Bambach Prof. Dr. Sabine Weiß Prof. Dr. Markus Bambach

S1/03 - 221
P04: Nanocomposites and Nanolaminated Functional Coatings
P04.1: Ternary Alloys and Nanolaminated Coatings
Session starts at 10:45
Lecture
Study on the CrN/AlN multi-layered coatings using spherical aberration corrected TEM

Dr. Zaoli Zhang

S1/03 - 23
P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.1: Fundamentals of Atomic Layer Processing
Session starts at 10:45
Highlight Lecture
Understanding the growth of multi-layered titania and alumina systems in atomic layer deposition

Dr. Robert Zierold Christoph Wiegand René Faust Alexander Meinhardt Prof. Dr. Robert Blick Prof. Dr. Kornelius Nielsch

S1/03 - 226
S05: Bulk Ultrafine- and Nano-Structured Materials
S05.1: Processing and Mechanical Properties
Session starts at 10:45
Lecture
Effect of Equal Channel Angular Pressing on Mechanical and In-Service Properties of Mg-1%Zn-0.3%Ca Alloy

Natalia Martynenko Dr. Elena Lukyanova Dr. Vladimir Serebryany Dr. Dmitry Prosvirnin Prof. Dr. Vladimir Terentiev Prof. Dr. Georgy Raab Prof. Dr. Sergey Dobatkin Prof. Yuri Estrin

S1/01 - A3
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.1: Concerning the Cantor Alloy
Session starts at 10:45
Lecture
Additive Manufacturing of CoCrFeMnNi Cantor alloy: Influence of the synthesis route on structure and properties

Dr. Jörg Kaspar Dr. Liliana Kotte Dr. Junhee Han Martin Kuczyk Sören Thieme Dr. Denis Beitelschmidt Prof. Dr. Martina Zimmermann Prof. Dr. Cristoph Leyens

S1/01 - A5
S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.1: Bulk Metallic Glasses and High-Entropy Alloys
Session starts at 10:45
Lecture
Fracture toughness testing of Bulk Metallic Glass - a discussion on sample size effects and new insights on Stress Corrosion Cracking of Zr52.5Cu17.9Ni14.6Al10Ti5

Dr.-Ing. David Geißler Dr. Horst Wendrock Prof. Dr. Jens Freudenberger Prof. Dr. Martina Zimmermann Dr. Annett Gebert

S1/01 - A1
11:45
B05: Biomaterials Applications
B05.1: Bioactive, Antibacterial Surfaces and Coatings
Session starts at 10:45
Keynote Lecture
Controlling Protein Adsorption through Nanostructured Polymeric Surfaces

Dr. Izabela Firkowska-Boden Xiaoyuan Zhang Christian Helbing Prof. Dr. Klaus D. Jandt

S1/01 - A01
C05: Small Scale and In Situ Mechanical Testing
C05.1: Fracture I
Session starts at 10:45
Lecture
Influence of pre-deformation on the microscale fracture toughness of bcc-materials

Stefan Gabel Prof. Dr. Mathias Göken Dr. Benoit Merle

S1/01 - A03
C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI
Session starts at 10:45
Lecture
Comparison of the Current Methods of Parent Austenite Reconstruction from Martensite Orientation Maps

Dr. Tuomo Nyyssönen Dr. Matti Isakov Prof. Veli-Tapani Kuokkala Prof. Pasi Peura

S1/01 - A04
C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.1: Session 1
Session starts at 10:45
Lecture
Characterization of the microstructure morphology in different phase states of metastable austenitic stainless steel AISI 347

Tobias Daniel Dr. Marek Smaga Prof. Dr. Tilmann Beck

S1/01 - A02
F01: High-Temperature Functional Materials
F01.1: Non-Metallic High-Temperature Materials
Session starts at 10:45
Lecture
Nanocomposite solid ion conductor: SPEEK polymer in TiO2 or ZrO2 nanotube arrays

Prof. Philippe Knauth Dr. Olim Ruzimuradov

S1/03 - 123
M03: Microstructure Evolution in Applied Materials: Process to Property
M03.1: Metals General
Session starts at 10:45
Lecture
Phase-field simulation of the anisotropic microstructure evolution during directional solidification in the eutectic NiAl-9Mo system

Kaveh Dargahi Noubary Michael Kellner Dr. Johannes Hötzer Prof. Dr. Britta Nestler

S1/01 - A2
M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.1: Session 1
Session starts at 10:45
Highlight Lecture
Modeling of dissipative processes during dynamic loading of shape memory alloys

Dr. Frank Wendler Shahabeddin Ahmadi Kiran Jacob Prof. Dr. Manfred Kohl

S1/01 - A4
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.1: Session 1
Session starts at 10:45
Lecture
Generation of Frenkel Defects above the Debye Temperature by Proliferation of Phonons near the Brillouin Zone Edge

Malte Jongmanns Prof. Dr. Rishi Raj Prof. Dr. Dietrich E. Wolf

S1/03 - 283
P02: Additive Manufacturing Technologies and Materials
P02.1: Applications
Session starts at 10:45
Lecture
Development of optimized Umbilical Connector Bracket for Powder Bed Laser Fusion

Prof. Dr.-Ing. Fernando Lasagni Jorge Vilanova Marta Garcia-Cosío Carlos Galleguillos Antonio Periñán Miguel Angel Alen

S1/03 - 221
P04: Nanocomposites and Nanolaminated Functional Coatings
P04.1: Ternary Alloys and Nanolaminated Coatings
Session starts at 10:45
Highlight Lecture
Toughness Enhancement in Superlattice TiN/WN Coatings

Julian Buchinger Nikola Koutná Prof. Paul Heinz Mayrhofer Dr. David Holec Dr. Matthias Bartosik

S1/03 - 23
P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.1: Fundamentals of Atomic Layer Processing
Session starts at 10:45
Lecture
HfO2 interface formation by thermal and plasma assisted ALD oxide growth on Hf metal

Stephan Aussen Alexander Hardtdegen Dr. Alexander Meledin Prof. Regina Dittmann Dr. Susanne Hoffmann-Eifert

S1/03 - 226
S05: Bulk Ultrafine- and Nano-Structured Materials
S05.1: Processing and Mechanical Properties
Session starts at 10:45
Lecture
On the effect of equal-channel angular pressing on the mechanical properties and microstructural evolution of 18 kt gold

Sebastian Fritsch Cagatay Elibol Philipp Frint Martin F.-X. Wagner

S1/01 - A3
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.1: Concerning the Cantor Alloy
Session starts at 10:45
Lecture
Deformation mechanisms and of two different high-entropy alloys: bcc NbMoCrTiAl vs. fcc CoCrFeMnNi

Ph.D. In-Chul Choi Prof. Dr. Zhaoping Lu Dr. Dong-Hyun Lee Prof. Dr. Jae-il Jang Dr. Hans Chen Dr. Alexander Kauffmann Prof. Dr. Martin Heilmaier Dr. Christian Brandl Dr. Ruth Schwaiger

S1/01 - A5
S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.1: Bulk Metallic Glasses and High-Entropy Alloys
Session starts at 10:45
Lecture
Mechanical properties of bulk metallic glass composites

Lisa Krämer Verena Maier-Kiener Karoline S. Kormout Yannick Champion Reinhard Pippan

S1/01 - A1
12:00
C05: Small Scale and In Situ Mechanical Testing
C05.1: Fracture I
Session starts at 10:45
Lecture
In-situ study of a crack initiation mechanism in the aluminum alloy 7475-T7351

Prof. Dr. Miroslav Piska Dr. Petra OHNISTOVA Dr. Jiri Dluhos Dr. Martin PETRENEC

S1/01 - A03
C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI
Session starts at 10:45
Oral Poster
Development of oxide scales in low carbon steel wire rods

Prof. Dr. Martina Cecilia Avalos Prof. Dr. Elena Brandaleze Mariela Melia Prof. Dr. Raul Bolmaro

S1/01 - A04
C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.1: Session 1
Session starts at 10:45
Lecture
A nano-tomographic study of the filling of grain boundary cavities formed during creep loading of Fe-Au, Fe-Mo and Fe-W alloys

Ph.D. Haixing Fang Nikodem Szymanski Casper Versteylen Prof. Dr. Ekkes Brück Dr. Peter Cloetens Prof. Dr. Sybrand van der Zwaag Dr. Niels van Dijk

S1/01 - A02
F01: High-Temperature Functional Materials
F01.1: Non-Metallic High-Temperature Materials
Session starts at 10:45
Lecture
High-Temperature Electrical Conductivity and Resonant Piezoelectric Properties of Bulk Single-Crystalline Aluminum Nitride

Dr. Iurii Kogut Ivan Gamov Dr. Carsten Hartmann Dr. Klaus Irmscher Prof. Dr. Matthias Bickermann Prof. Dr. Holger Fritze

S1/03 - 123
M03: Microstructure Evolution in Applied Materials: Process to Property
M03.1: Metals General
Session starts at 10:45
Lecture
Analysing the influence of neighbours on the spheroidization of finite 3-dimensional rods in a lamellar arrangement: Phase-field simulations

Tobias Mittnacht Dr. Daniel Schneider Prince Gideon Kubendran Amos Prof. Dr. Britta Nestler

S1/01 - A2
M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.1: Session 1
Session starts at 10:45
Lecture
Pore Annihilation in Nickel-base Superalloys During Hot Isostatic Pressing: A phase field modeling

Dr.-Ing. Yann Le Bouar Dr. Antoine Ruffini Dr. Alphonse Finel

S1/01 - A4
P02: Additive Manufacturing Technologies and Materials
P02.1: Applications
Session starts at 10:45
Lecture
Additive Manufactured TiTa Alloys for Biomedical Applications

Erin Brodie Dr. Jess Frith Dr. Andrey Molotnikov

S1/03 - 221
P04: Nanocomposites and Nanolaminated Functional Coatings
P04.1: Ternary Alloys and Nanolaminated Coatings
Session starts at 10:45
Lecture
Magnetron-sputtered Al-containing MAX phase carbide thin films and their application as oxidation-resistant coatings

Ph.D. Chongchong Tang Dr. Martin Steinbrueck Steinbrueck Mirco Grosse Dr. Sven Ulrich Dr. Michael Stueber Prof. Dr. Hans Seifert

S1/03 - 23
P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.1: Fundamentals of Atomic Layer Processing
Session starts at 10:45
Lecture
Atomic Layer Deposition: from molecular chemistry to nanocoatings

Ph.D. Pengmei Yu Dr. Mehtap Buyukyazi Christoph Bohr Dr. Mateusz Scigaj Prof. Dr. Sanjay Mathur Dr. Mariona Coll

S1/03 - 226
S05: Bulk Ultrafine- and Nano-Structured Materials
S05.1: Processing and Mechanical Properties
Session starts at 10:45
Lecture
Properties of iron after large and severe plastic deformation – Application potential for precursors to ultrafine grained microstructures

Dr. Enrico Bruder

S1/01 - A3
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.1: Concerning the Cantor Alloy
Session starts at 10:45
Lecture
Influence of microstructure and testing temperature on the thermally activated deformation behavior of the CrMnFeCoNi high-entropy alloy

Dr. Verena Maier-Kiener Benjamin Schuh Prof. Dr. Helmut Clemens Dr. Anton Hohenwarter

S1/01 - A5
S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.1: Bulk Metallic Glasses and High-Entropy Alloys
Session starts at 10:45
Lecture
Influence of the processing route on the deformation behavior of metallic nanoglasses

Dr. Omar Adjaoud Prof. Dr. Karsten Albe

S1/01 - A1
14:30
B05: Biomaterials Applications
B05.2: Scaffolds and Nanomaterials for Tissue Engineering
Session starts at 14:30
Lecture
Anti-microbial alginate gels with improved stability as a cell scaffold and wound dressing material

Dr. Patrick van Rijn

S1/01 - A01
C05: Small Scale and In Situ Mechanical Testing
C05.2: In-Situ Small Scale Testing
Session starts at 14:30
Highlight Lecture
Anisotropic static and cyclic mechanical properties in nanolayered pearlitic steels

Dr. Marlene Kapp Dr. Oliver Renk Prof. Dr. Reinhard Pippan

S1/01 - A03
C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30
Highlight Lecture
Automated calibration of the atom probe tomography reconstructions with electron microscopy

Shyam Katnagallu Dr. Surendra Makineni Dr. Oana Cojocaru-Mirédin Dr. Torsten Schwarz Prof. Dierk Raabe Dr. Baptiste Gault Dr. Isabelle Mouton

S1/01 - A04
C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.2: Session 2
Session starts at 14:30
Keynote Lecture
Strain localizations during cyclic deformation investigated by high-resolution digital image correlation

Dr.-Ing. Anja Weidner Prof. Horst Biermann

S1/01 - A02
F01: High-Temperature Functional Materials
F01.2: High-Temperature Sensor Materials
Session starts at 14:30
Keynote Lecture
Sensor Systems for Additive Manufacturing

Prof. Dr. Jürgen Hartmann Kevin Knopp Philipp Lenski Marc Zänglein Dr. Jochen Manara Thomas Stark Matthias Zipf Mariacarla Arduini Ekkehard Schreiber Dr. Udo Krüger Prof. Dr. Franz Schmidt Dr. Martin Brunner

S1/03 - 123
F04: Functional Materials for Energy Applications
F04.2: Session 2
Session starts at 14:30
Lecture
High vortex activation energies in the AC magnetic response of superconducting films and coatings close to the DC irreversibility line

Lucica Miu

S1/03 - 223
M03: Microstructure Evolution in Applied Materials: Process to Property
M03.2: Chemo-Mechanical Coupling in Metals
Session starts at 14:30
Lecture
Bainitic transformation for press hardening applications: A multiscale FE-MPF coupled approach

Mingxuan Lin Dr. Diego Said Schicchi Dr. Martin Hunkel Prof. Dr. Ulrich Prahl

S1/01 - A2
M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.2: Session 2
Session starts at 14:30
Highlight Lecture
Chemo-mechanical modeling of dislocations in complex alloys

Dr. Jaber Rezaei Mianroodi Paraskevas Kontis Pratheek Shanthraj Baptiste Gault Bob Svendsen

S1/01 - A4
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.2: Session 2
Session starts at 14:30
Highlight Lecture
Field-assisted/flash sintering and related mass transport phenomena in oxide ceramics

Dr. Hidehiro Yoshida Yamato Sasaki Prof. Takahisa Yamamoto

S1/03 - 283
P02: Additive Manufacturing Technologies and Materials
P02.2: Materials Processing and Characterization
Session starts at 14:30
Keynote Lecture
Tailoring titanium alloys to additive manufacturing

Dr. Pere Barriobero Vila Dr. Joachim Gussone Dr. Jan Haubrich Dr. Andreas Stark Dr. Norbert Schell Prof. Dr. Guillermo Requena

S1/03 - 221
P04: Nanocomposites and Nanolaminated Functional Coatings
P04.2: Microstructural Design and Nanocomposite Thin Films
Session starts at 14:30
Keynote Lecture
Towards nanostructured materials with enhanced mechanical properties by dedicated microstructural design

Prof. Dr. Rostislav Daniel Prof. Dr. Christian Mitterer Prof. Dr. Jozef Keckes

S1/03 - 23
P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.2: Nanocoatings for Microelectronics, Energy Conversion and Storage
Session starts at 14:30
Highlight Lecture
Advanced in Atomic Layer Deposition Techniques: Electrocatalyst for Hydrogen Evolution and Charge Transporting Layer for Perovskite Solar Cells

Prof. Dr. Hyunjung Shin

S1/03 - 226
S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms
Session starts at 14:30
Lecture
Abnormal grain growth mediated by fractal boundary migration at the nanoscale

Dr. Christian Braun Raphael Zeller Hanadi Menzel Nils Boussard Jörg Schmauch Prof. Carl E. Krill III Prof. Dr. Rainer Birringer

S1/01 - A3
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.2: Basics and Overviews
Session starts at 14:30
Keynote Lecture
Effect of grain size, temperature and texture on mechanical properties of the CrCoNi medium-entropy alloy

Mike Schneider Tanguy Manesau Prof. Dr. Guillaume Laplanche Prof. Dr. Gunther Eggeler Prof. Dr. Easo George

S1/01 - A5
S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.2: Nanostructured Materials and High-Entropy Alloys
Session starts at 14:30
Keynote Lecture
Microstructure, texture and strength evolution during severe plastic deformation of CrMnFeCoNi high-entropy alloy

Prof. Dr. Werner Skrotzki Aurimas Pukenas Bertalan Joni Eva Odor Prof. Dr. Tamas Ungar Dr. Anton Hohenwarter Prof. Dr. Reinhard Pippan Prof. Dr. Easo George

S1/01 - A1
Z02: Networking-Symposium - International opportunities for young researchers
Z02.1: Session 1
Session starts at 14:30
Lecture
Benefits and challenges of researching in an international context: the globalized professor

Prof. Dr. Aldo R. Boccaccini

14:45
B05: Biomaterials Applications
B05.2: Scaffolds and Nanomaterials for Tissue Engineering
Session starts at 14:30
Lecture
New Ways in Nanomedicine Based on Biocompatible Porous Silicon Nanostructures

Dr. Vladimir Sivakov Dr. Liubov Osminkina

S1/01 - A01
C05: Small Scale and In Situ Mechanical Testing
C05.2: In-Situ Small Scale Testing
Session starts at 14:30
Lecture
Local Fatigue Testing by Dynamic Micropillar Compression of ARB Processed Bimodal Copper Sheets

Sebastian Krauß Prof. Dr. Mathias Göken Dr. Benoit Merle

S1/01 - A03
C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30
Lecture
Correlative high-resolution characterization of strengthening effects in the Ni-based superalloy Inconel 718

Felix Theska Prof. Simon P. Ringer Dr. Sophie Primig

S1/01 - A04
F04: Functional Materials for Energy Applications
F04.2: Session 2
Session starts at 14:30
Lecture
Quench behavior of high-temperature superconductor tapes for power applications

Nicolo Riva Prof. Dr. Francesco Grilli Prof. Dr. Frédéric Sirois Dr. Bertrand Dutoit Dr. Christian Lacroix Simon Richard

S1/03 - 223
M03: Microstructure Evolution in Applied Materials: Process to Property
M03.2: Chemo-Mechanical Coupling in Metals
Session starts at 14:30
Lecture
A Microstructure-Based Thermodynamically Consistent Model for the Thermomechanical Processing of Metallic Materials

Lukas Kertsch Dr. Dirk Helm

S1/01 - A2
M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.2: Session 2
Session starts at 14:30
Lecture
Grain size and toughness: Elucidating the contradicting role of grain boundaries

Dr. Jens Reiser Prof. Dr. Alexander Hartmaier

S1/01 - A4
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.2: Session 2
Session starts at 14:30
Lecture
A technique for obtaining uniform microstructure in flash-sintered oxide ceramics

Prof. Takahisa Yamamoto Prof. Tomoharu Tokunaga Prof. Dr. Hidehiro Yoshida

S1/03 - 283
P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.2: Nanocoatings for Microelectronics, Energy Conversion and Storage
Session starts at 14:30
Highlight Lecture
Turning lead into gold: Inexpensive materials and accurate nanostructuring in energy conversion

Prof. Julien Bachmann

S1/03 - 226
S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms
Session starts at 14:30
Lecture
Influence of processing conditions on the defect structure in nanostructured materials

Prof. Dr. Jeno Gubicza

S1/01 - A3
Z02: Networking-Symposium - International opportunities for young researchers
Z02.1: Session 1
Session starts at 14:30
Lecture
Research in Germany

Dr. Annina Lottermann

15:00
B05: Biomaterials Applications
B05.2: Scaffolds and Nanomaterials for Tissue Engineering
Session starts at 14:30
Lecture
Initial study on 3D printing of piezoelectric barium titanate ceramics for bone tissue engineering

Christian Polley Thomas Distler David Rüffer Dr. Rainer Detsch Prof. Dr. Aldo R. Boccaccini Prof. Dr. Hermann Seitz

S1/01 - A01
C05: Small Scale and In Situ Mechanical Testing
C05.2: In-Situ Small Scale Testing
Session starts at 14:30
Lecture
Dynamic compression testing of silicon micropillars

Dr. Rajaprakash Ramachandramoorthy Dr. Laszlo Petho Dr. Johann Michler Dr. Jakob Schwiedrzik Dr. Gaurav Mohanty

S1/01 - A03
C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30
Lecture
Electromagnetic field measurements of needle-shaped specimens

Fengshan Zheng Dr. Vadim Migunov Dr. Jan Caron Prof. Dr. Giulio Pozzi Prof. Dr. Rafal E Dunin-Borkowski

S1/01 - A04
C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.2: Session 2
Session starts at 14:30
Lecture
Local deformation behavior of Al-matrix-composites by in situ testing and advanced mathematical image correlation

Alexandra Pokhlestova Sebastian Schuff Prof. Dr. Frank Balle Prof. Dr. Tilmann Beck Dr. Jan Henrik Fitschen Prof. Dr. Gabriele Steidl

S1/01 - A02
F01: High-Temperature Functional Materials
F01.2: High-Temperature Sensor Materials
Session starts at 14:30
Lecture
Studies on the interaction of indium tin oxide with carbon monoxide and additional gas species

Stefan Dietrich Dr. Mihails Kusnezoff Dr. Nikolai Trofimenko Dr. Uwe Petasch

S1/03 - 123
F04: Functional Materials for Energy Applications
F04.2: Session 2
Session starts at 14:30
Lecture
The lightest superconducting wire based on Mg, Ti and Al

Dr. Pavol Kovac Imrich Hušek Tibor Melišek Lubomir Kopera Dr. Miloslav Kulich Dr. Jan Kováč

S1/03 - 223
M03: Microstructure Evolution in Applied Materials: Process to Property
M03.2: Chemo-Mechanical Coupling in Metals
Session starts at 14:30
Lecture
Chemo-mechanical multiphase-field model: Application to phase transformation processes during the heat treatment of steel

Ephraim Schoof PG Kubendran Amos Dr. Daniel Schneider Prof. Dr. Britta Nestler

S1/01 - A2
M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.2: Session 2
Session starts at 14:30
Lecture
Dislocation Evolution Model of Nano Indentation in connection with Hydrogen Embrittlement

Jan Inge Meling Prof. Dr. Afrooz Barnoush

S1/01 - A4
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.2: Session 2
Session starts at 14:30
Lecture
Flash Sintering of Boron-Containing Ceramics

Aubrey Fry Dr. Selva Vennila Raju Dr. Victoria Blair Dr. W. Taylor Shoulders Dr. Raymond Brennan Dr. Lionel Vargas-Gonzalez

S1/03 - 283
P02: Additive Manufacturing Technologies and Materials
P02.2: Materials Processing and Characterization
Session starts at 14:30
Lecture
Process Parameters for Selective Laser Melting of Duplex Stainless Steel

Marc Huber Matthias Fankhauser Martin Hartmann Thomas Kränzler Robin Rettberg Prof. Dr. Kaspar Löffel

S1/03 - 221
P04: Nanocomposites and Nanolaminated Functional Coatings
P04.2: Microstructural Design and Nanocomposite Thin Films
Session starts at 14:30
Lecture
Solid solution hardened (Ti1-x,Zrx)C1-y:H and carbon-based nanocomposites in the system Ti-Zr-C-H deposited by high power impulse magnetron sputtering

Christian Poltorak Dr. Harald Leiste Dr. Monika Rinke Dr. Sven Ulrich

S1/03 - 23
P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.2: Nanocoatings for Microelectronics, Energy Conversion and Storage
Session starts at 14:30
Highlight Lecture
Spatial Atmospheric ALD: a scalable technique for the deposition of Zinc Oxysulfide Buffer Layers for CIGS Solar Cells

Dr. Fieke van den Bruele Dr. Andrea Illiberi Dr. Paul Poodt Dr. Pieter Jan Bolt Corné Frijters

S1/03 - 226
S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms
Session starts at 14:30
Lecture
Synchronised in-situ X-ray diffraction and strain measurement during deformation of nanocrystalline PdAu

Michael Johannes Deckarm Andreas Leibner Marta Majkut Vadim Dyadkin Rainer Birringer

S1/01 - A3
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.2: Basics and Overviews
Session starts at 14:30
Lecture
On the growth of single-phase single-crystalline fcc and bcc High-Entropy Alloys

Tim Lienig Dr. Michael Feuerbacher Carsten Thomas Eva Würtz

S1/01 - A5
S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.2: Nanostructured Materials and High-Entropy Alloys
Session starts at 14:30
Lecture
Deformation-induced supersaturation in the immiscible Cu-Ag system

Karoline Kormout Stefan Zeiler Prof. Reinhard Pippan

S1/01 - A1
15:15
B05: Biomaterials Applications
B05.2: Scaffolds and Nanomaterials for Tissue Engineering
Session starts at 14:30
Lecture
Drug-loaded polymer-based matrices manufactured by electrohydrodynamic processes

Prof. Dr. Gustavo Abraham Dr. Guadalupe Rivero

S1/01 - A01
C05: Small Scale and In Situ Mechanical Testing
C05.2: In-Situ Small Scale Testing
Session starts at 14:30
Lecture
In-situ study of recrystallization and deformation processes in non-toxic free cutting steel

Jirí Dluhoš Tomáš Babinský Antoine Candeias Dr. Martin Petrenec

S1/01 - A03
C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30
Highlight Lecture
Long-range ordered nanoscale domains in an Fe-Co-Mo Maraging steel, an atom probe microscopy and neutron diffraction study

Dr. Sophie Primig Felix Theska Dr. Christoph Turk Dr. Anna Ceguerra Prof. Simon Ringer

S1/01 - A04
C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.2: Session 2
Session starts at 14:30
Lecture
On the deformation behavior of Mg bicrystal with 90° 〈10-10〉 symmetric tilt boundary during plane strain compression

Marcel Schreiber Dr. Talal Al-Samman Prof. Dr. Sandra Korte-Kerzel Prof. Dr. Dmitri A. Molodov

S1/01 - A02
F01: High-Temperature Functional Materials
F01.2: High-Temperature Sensor Materials
Session starts at 14:30
Lecture
Hydrogen Sensing in Harsh Environments: Mechanisms and Cross-Sensitivities for the Photonic Bandgap Shift of Tungsten Oxide Inverse Opals

Sabrina Amrehn Dr. Xia Wu Dr. Thorsten Wagner

S1/03 - 123
F04: Functional Materials for Energy Applications
F04.2: Session 2
Session starts at 14:30
Lecture
Properties and improvements of commercial HTS wires using an e-beam PVD process

Dr. Markus Bauer Dr. Veit Große Timo Koenen Dr. Sandra Kauffmann-Weiß Dr. Jens Hänisch

S1/03 - 223
M03: Microstructure Evolution in Applied Materials: Process to Property
M03.2: Chemo-Mechanical Coupling in Metals
Session starts at 14:30
Lecture
Growth and ripening behavior of γ''-precipitation in Nickel-base superalloys during heat treatment

Yueh-Yu Lin Felix Schleifer Dr. Michael Fleck Prof. Dr. Uwe Glatzel

S1/01 - A2
M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.2: Session 2
Session starts at 14:30
Lecture
Microstructure, creep and strain partitioning of Mg-Al-Ca alloys

Muhammad Zubair Dr. Stefanie Sandloebes James Gibson Prof. Dr. Sandra Korte-Kerzel

S1/01 - A4
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.2: Session 2
Session starts at 14:30
Lecture
Electrical field assisted sintering of polycrystalline Yttrium doped Ceria investigated by Sinter-forging

Chen Cao Dr. Robert Mücke Prof. Olivier Guillon

S1/03 - 283
P02: Additive Manufacturing Technologies and Materials
P02.2: Materials Processing and Characterization
Session starts at 14:30
Lecture
Influence of the chemical composition and building direction on the fatigue behavior of additively manufactured 316L

Dipl.-Ing. Bastian Blinn Dr. Marcus Klein Prof. Dr. Tilmann Beck

S1/03 - 221
P04: Nanocomposites and Nanolaminated Functional Coatings
P04.2: Microstructural Design and Nanocomposite Thin Films
Session starts at 14:30
Highlight Lecture
Mechanical properties of tough nanocomposites: a computational study by molecular dynamics

Dr. Diego Martinez-Martinez Prof. Dr. Olalla Faza

S1/03 - 23
P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.2: Nanocoatings for Microelectronics, Energy Conversion and Storage
Session starts at 14:30
Highlight Lecture
Recent advances in Atomic Layer Processing of materials for emerging microelectronic device fabrication

Prof. Dr. Marceline Bonvalot Samia Belahcen Vincent Pesce Dr. Rémy Gassilloud Prof. Dr. Patrice Gonon Ahmad Bsiesy Prof. Dr. Christphe Vallée Dr. Ahmad Chaker

S1/03 - 226
S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms
Session starts at 14:30
Highlight Lecture
Observation of Grain Boundary Sliding in an Ultrafine Grained Ferrite Steel

Laura Ahmels Dr. Enrico Bruder

S1/01 - A3
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.2: Basics and Overviews
Session starts at 14:30
Lecture
Combining Thermodynamic Modeling and Additive Manufacturing for High-Throughput Screening of Compositionally Complex Alloys

Fabian Kies Dr. Bengt Hallstedt Dr. Christian Haase

S1/01 - A5
S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.2: Nanostructured Materials and High-Entropy Alloys
Session starts at 14:30
Lecture
A comparative study on oxygen effect in nanocrystalline alloys

Dr. Jinming Guo Dr. Zaoli Zhang

S1/01 - A1
Z02: Networking-Symposium - International opportunities for young researchers
Z02.1: Session 1
Session starts at 14:30
Lecture
Don’t be afraid – Go study abroad!

Simon Bernarding

15:30
B05: Biomaterials Applications
B05.2: Scaffolds and Nanomaterials for Tissue Engineering
Session starts at 14:30
Lecture
The ESA effect as possible quantification method in nanoparticle modification

Alexander Renner Markus Schütz Daniel Moog Dr. Thomas Fischer Prof. Dr. Sanjay Mathur

S1/01 - A01
C05: Small Scale and In Situ Mechanical Testing
C05.2: In-Situ Small Scale Testing
Session starts at 14:30
Lecture
Hydrogen embrittlement in nickel-based superalloys

Dipl.-Ing. Anna Ebner Dr. Steffen Brinckmann Dr. Helmut Clemens Dr. Reinhard Pippan Dr. Verena Maier-Kiener

S1/01 - A03
C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30
Lecture
Correlative electron microscopy and atom probe tomography investigations on solute segregations to planar faults in crept Co based superalloys

Dr. Surendra Kumar Makineni Dr. Junyang He Malte Lenz Prof. Erdmann Spiecker Prof. Dierk Raabe Dr. Baptiste Gault Ankit Kumar

S1/01 - A04
C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.2: Session 2
Session starts at 14:30
Lecture
Experimental Characterization of Crack Initiation in High Performance Steels for the Development and the Benchmarking of Material Models for the Fatigue Life Prediction

Ali Riza Durmaz Michael Buck Prof. Dr. Christoph Eberl Dr. Thomas Straub

S1/01 - A02
F01: High-Temperature Functional Materials
F01.2: High-Temperature Sensor Materials
Session starts at 14:30
Lecture
Feasibility of Cr- and Co-TiO2 for High-Temperature Gas Sensor Applications

Dr. Bilge Saruhan-Brings Dr. Roussin Lontio Fomekong

S1/03 - 123
F04: Functional Materials for Energy Applications
F04.2: Session 2
Session starts at 14:30
Highlight Lecture
High Quality Epitaxial NdFeAs(O,F) Films By Molecular Beam Epitaxy: Influence Of Film Thickness On Transport Properties

Dr. Sandra Kauffmann-Weiss Prof. Kazumasa Iida Takuya Matsumoto Taito Ohmura Dr. Takafumi Hatano Dr. Torben Boll Marco Langer Sven Meyer Dr. Chiara Tarantini Dr. Jan Jaroszynski Dr. Reinhard Schneider Prof. Bernhard Holzapfel Prof. Hiroshi Ikuta Dr. Jens Hänisch

S1/03 - 223
M03: Microstructure Evolution in Applied Materials: Process to Property
M03.2: Chemo-Mechanical Coupling in Metals
Session starts at 14:30
Highlight Lecture
A Sharp Interface Phase Field Method

Dr. Alphonse Finel Dr. Yann Le Bouar

S1/01 - A2
M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.2: Session 2
Session starts at 14:30
Lecture
Plastic irreversibility in cyclic loading with strain gradients

Dr.-Ing. Markus Stricker Dr. Daniel Weygand Prof. Dr. Peter Gumbsch

S1/01 - A4
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.2: Session 2
Session starts at 14:30
Lecture
Electric field assisted sintering of polycrystal ceria inside a transmission electron microscope

Zheng Ma Dr. Lei Jin Dr. Vadim Migunov Chen Cao Dr. Robert Mücke Prof. Dr. Rafal Dunin-Borkowski Prof. Dr. Olivier Guillon

S1/03 - 283
P02: Additive Manufacturing Technologies and Materials
P02.2: Materials Processing and Characterization
Session starts at 14:30
Lecture
Selective laser melting of surface inoculated metal powders

Dr. Kay-Peter Hoyer Florian Hengsbach Madison Burns Markus Voigt Prof. Dr. Guido Grundmeier Dr. Evgeny Zhuravlev Prof. Dr. Olaf Kessler Prof. Dr. Mirko Schaper Dipl.-Ing. Lennart Tasche

S1/03 - 221
P04: Nanocomposites and Nanolaminated Functional Coatings
P04.2: Microstructural Design and Nanocomposite Thin Films
Session starts at 14:30
Lecture
Self-structuring in Zr1-xAlxN nanocomposites films: a material system with diverse structures

Dr. Naureen Ghafoor Prof. Ivan Petrov Dr. David Holec Dr. Grzegorz Greczynski Dr. Jens Jensen Prof. Per Persson Prof. Lars Hultman Prof. Jens Birch

S1/03 - 23
P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.2: Nanocoatings for Microelectronics, Energy Conversion and Storage
Session starts at 14:30
Highlight Lecture
Challenges and Opportunities for Atomic Layer Deposition of Two-Dimensional Materials in Nanoelectronic Applications

Benjamin Groven Dr. Yoann Tomczak Haodong Zhang Ankit Nalin Mehta Dr. Hugo Bender Dr. Tom Schram Dr. Quentin Smets Prof. Dr. Wilfried Vandervorst Prof. Dr. Marc Heyns Dr. Matty Caymax Dr. Iuliana Radu Prof. Dr. Annelies Delabie

S1/03 - 226
S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms
Session starts at 14:30
Lecture
Effect of PLC band formation on the formability of a particle reinforced AA2017 alloy during Equal-Channel Angular Pressing

Christian Illgen Dr. Markus Härtel Dr. Philipp Frint Prof. Dr. Martin F.-X. Wagner

S1/01 - A3
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.2: Basics and Overviews
Session starts at 14:30
Lecture
Grain Boundary Mobility in the High Entropy Alloys - Insights from Atomistic Computer Simulations

Daniel Utt Dr. Alexander Stukowski Prof. Dr. Karsten Albe

S1/01 - A5
S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.2: Nanostructured Materials and High-Entropy Alloys
Session starts at 14:30
Highlight Lecture
What can be learned about SPD metals from dilatometry and what can be learned about defect physics from SPD metals

Prof. Dr. Roland Würschum

S1/01 - A1
Z02: Networking-Symposium - International opportunities for young researchers
Z02.1: Session 1
Session starts at 14:30
Lecture
Brief overview of the Argentine-German University Center (CUAA-DAHZ)

Daniel Zimmermann

15:45
B05: Biomaterials Applications
B05.2: Scaffolds and Nanomaterials for Tissue Engineering
Session starts at 14:30
Lecture
Novel Multifunctional Nanocomposite Scaffolds As Matrices for Drug Delivery and Bone Tissue Engineering

Prof. Dr. Aldo R. Boccaccini Dr. Juan Pablo Cattalini Rodrigo Vidotto Prof. Dr. Viviana Mouriño

S1/01 - A01
C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30
Oral Poster
Oxygen deficiency evolution in defect-engineered epitaxial SrMnO3 thin films

Hongguang Wang Dr. Vesna Srot Dr. Yi Wang Dr. Hans Boscker Prof. Dr. Jochen Mannhart Prof. Dr. Peter van Aken

S1/01 - A04
C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.2: Session 2
Session starts at 14:30
Lecture
Crackling noise in multicaloric ammonium sulphate under thermal cycling

Dr. Guillaume Nataf Prof. Michael Carpenter Dr. Eduard Vives Dr. Sam Crossley Dr. Xavier Moya

S1/01 - A02
F01: High-Temperature Functional Materials
F01.2: High-Temperature Sensor Materials
Session starts at 14:30
Lecture
Electromechanical loss and ionic transport in CTGS single crystals at temperatures up to 1200 °C

Dr. Yuriy Suhak Dr. Michal Schulz Dr. Ward Johnson Prof. Dr. Holger Fritze

S1/03 - 123
F04: Functional Materials for Energy Applications
F04.2: Session 2
Session starts at 14:30
Lecture
CSD-grown superconducting GdBa2Cu3O7-delta nanocomposite films: a comparison between in-situ and ex-situ nanoparticle formation

Dr. Pablo Cayado

S1/03 - 223
M03: Microstructure Evolution in Applied Materials: Process to Property
M03.2: Chemo-Mechanical Coupling in Metals
Session starts at 14:30
Lecture
Multi-scale mechanics of tungsten: Microstructure evolution under fusion conditions

Varun Shah Prof. Dr. Marc Geers Dr. Hans van Dommelen

S1/01 - A2
M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.2: Session 2
Session starts at 14:30
Lecture
From single crystals to polycrystalline material modeling: a FFT-based Dislocation Dynamics approach

Dr. Francesca Boioli Dr. Benoit Devincre Dr. Riccardo Gatti Dr. Lionel Gélébart Dr. Laurant Dupuy

S1/01 - A4
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.2: Session 2
Session starts at 14:30
Lecture
Processing of Ceramic Composites via Single-Mode Microwave Sintering

Dr. Selva Vennila Raju Dr. Michael Kornecki Dr. Victoria Blair Dr. Raymond Brennan

S1/03 - 283
P02: Additive Manufacturing Technologies and Materials
P02.2: Materials Processing and Characterization
Session starts at 14:30
Lecture
Powder development and characterization for the additive manufacturing of cemented carbide components

Thomas Rieger Tim Schubert Julian Schurr Simon Ruck Markus Hofele David Kolb Prof. Dr. Harald Riegel Dr. Timo Bernthaler Prof. Dr. Gerhard Schneider

S1/03 - 221
P04: Nanocomposites and Nanolaminated Functional Coatings
P04.2: Microstructural Design and Nanocomposite Thin Films
Session starts at 14:30
Lecture
Generic Processing of Nanoparticle-based composite Coatings on Large Surfaces

Dipl.-Ing. Olivier Sublemontier Dr. Youri Rousseau

S1/03 - 23
P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.2: Nanocoatings for Microelectronics, Energy Conversion and Storage
Session starts at 14:30
Lecture
Atomic Layer Deposition of Spin Hall Active Platinum Thin Films

Michaela Lammel Richard Schlitz Dr. Akinwumi Abimbola Amusan Stefanie Schlicht Dr. Tommi Tynell Prof. Dr. Julien Bachmann Prof. Dr. Georg Woltersdorf Prof. Dr. Kornelius Nielsch Prof. Dr. Sebastian T.B. Goennenwein Dr. Andy Thomas

S1/03 - 226
S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms
Session starts at 14:30
Lecture
Ductilisation of tungsten (W) through cold-rolling: Mechanisms of plastic deformation in cold rolled, ultrafine-grained tungsten sheets

Simon Bonk Dr. Andreas Hoffmann Dr. Jan Hoffmann Ute Jäntsch Dr. Michael Klimenkov Dr. Jens Reiser

S1/01 - A3
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.2: Basics and Overviews
Session starts at 14:30
Lecture
Calphad thermodynamic database for fcc-based multi-principal element alloys

Dr. Bengt Hallstedt

S1/01 - A5
S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.2: Nanostructured Materials and High-Entropy Alloys
Session starts at 14:30
Lecture
Features of nanostructured materials for micromanufacturing

Dr. Roman Kulagin Prof. Yuri Estrin Prof. Yan Beygelzimer Dr. Andrej Mazilkin Dr. Dmytro Pavlenko Prof. Horst Hahn

S1/01 - A1
Z02: Networking-Symposium - International opportunities for young researchers
Z02.1: Session 1
Session starts at 14:30
Lecture
Exchange or change?

Luciano Fissore

16:30
B05: Biomaterials Applications
B05.3: Session 3
Session starts at 16:30
Lecture
Mechanically- and chemically-active nanostructured antibacterial surfaces fabricated by glancing angle sputter deposition

Nadine Ziegler Prof. Dr. Christina Sengstock Viola Mai Prof. Dr. Kristina Tschulik Prof. Dr. Manfred Köller Prof. Dr. Alfred Ludwig

S1/01 - A01
C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue
Session starts at 16:30
Lecture
An experimental and microstructural investigation of biaxial Bauschinger effects in IF steel DC06 using in-situ neutron diffraction

Dr.-Ing. Markus Härtel Dr. Tobias Panzner Dr. Enrico Bruder Dr. Stefan Schmaltz Dr. Steven van Petegm Prof. Dr. Kai Willner Prof. Dr. Helena van Swygenhoven Prof. Dr. Martin F.-X. Wagner

S1/01 - A03
C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.3: Session 3
Session starts at 16:30
Lecture
Advancing materials by SPD-mediated lattice defect engineering

Prof. Dr. Michael Zehetbauer Prof. Dr. Ernst Bauer Dr. Maciej Krystian Prof. Dr. Roland Grössinger Prof. Dr. Gerhard Krexner Dr. Jelena Horky Dr. Bernhard Mingler Dr. Gerda Rogl Prof. Dr. Peter Rogl

S1/01 - A02
F01: High-Temperature Functional Materials
F01.3: Metallic High-Temperature Materials
Session starts at 16:30
Lecture
High temperature corrosion in waste-to-energy plants due to chlorine release through sulfation reaction of alkali chlorides

Sebastian Pentz Daniel Ott Prof. Dr. Ferdinand Haider Dr. Ragnar Warnecke

S1/03 - 123
F04: Functional Materials for Energy Applications
F04.3: Session 3
Session starts at 16:30
Lecture
Is ReO3 a mixed ionic–electronic conductor? A DFT study of defect formation and migration in a B(VI)O3 perovskite-type oxide

Jana P. Parras

S1/03 - 223
M03: Microstructure Evolution in Applied Materials: Process to Property
M03.3: Polymers and Miscellaneous
Session starts at 16:30
Keynote Lecture
Shape memory effect in polymers containing small molecules

Dr. Fathollah Varnik Dipl.-Ing. Elias Mahmoudinezhad Zirdehi

S1/01 - A2
M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.3: Session 3
Session starts at 16:30
Keynote Lecture
A direct look at how dislocations move

Dr. Alexander Stukowski

S1/01 - A4
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.3: Session 3
Session starts at 16:30
Highlight Lecture
Reaction controlled field assisted sintering of ceramic nanocomposites

Prof. Dr. Andrey Ragulya

S1/03 - 283
P02: Additive Manufacturing Technologies and Materials
P02.3: Processes
Session starts at 16:30
Lecture
Printing Photopolymers by Hot Lithography

Bernhard Steyrer Prof. Robert Liska Prof. Jürgen Stampfl

S1/03 - 221
P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.3: Hybrid and Molecular Layer Deposition
Session starts at 16:30
Keynote Lecture
Hybrid Materials by Vapor Phase Infiltration of Ceramics into Polymers

Prof. Dr. Mato Knez

S1/03 - 226
P07: Joining
P07.1: Session 1
Session starts at 16:30
Lecture
Development of a high temperature resistant reactive filler alloy for brazing of SiC

Dipl.-Ing. Marius Graffé Sven Roszeitis Dr. Marion Herrmann Dr. Hans-Peter Martin Prof. Dr. Wolfgang Lippmann

S1/03 - 23
S05: Bulk Ultrafine- and Nano-Structured Materials
S05.3: Thermal Effects and Magnetic Properties
Session starts at 16:30
Lecture
Formation of ω phase in Ti–Fe alloys and its stability upon heating

Dr.-Ing. Mario J. Kriegel Dr. Askar Kilmametov Dr. Volker Klemm Dr. Olga Fabrichnaya Prof. Dr. Boris B. Straumal Prof. Dr. Julia Ivanisenko Prof. Dr. Horst Hahn Prof. Dr. David Rafaja

S1/01 - A3
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure
Session starts at 16:30
Lecture
Microstructural properties of Al-containing refractory high entropy alloys for high temperature applications

Dipl.-Ing. Hans Chen Dr. Alexander Kauffmann Sascha Seils Dr. Torben Boll Ian Harding Prof. K. Sharvan Kumar Dr. Dorothée Vinga Szabó Franz Müller Dr. Bronislava Gorr Prof. Dr. Hans-Jürgen Christ Prof. Dr. Martin Heilmaier

S1/01 - A5
S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.3: Properties of SPD Materials and Nanocomposites
Session starts at 16:30
Keynote Lecture
Incremental Feedings with High-Pressure Torsion (IF-HPT) and High-Pressure Sliding (IF-HPS) for Upsizing Sample Dimensions

Prof. Zenji Horita

S1/01 - A1
Z02: Networking-Symposium - International opportunities for young researchers
Z02.2: Session 2
Session starts at 16:30
Lecture
International Research Experiences and Opportunities

Prof. Kevin Hemker

16:45
B05: Biomaterials Applications
B05.3: Session 3
Session starts at 16:30
Lecture
Additive manufacturing of titanium-hydrogel-hydroxyapatite hybrid constructs for regeneration of cranial bone defects

Vera Bednarzig Prof. Dr. Aldo Boccaccini Dr. Rainer Detsch

S1/01 - A01
C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue
Session starts at 16:30
Lecture
The role of room temperature grain coarsening on initiation of fatigue damage in thin metal films

Dr. Oleksandr Glushko

S1/01 - A03
C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.3: Session 3
Session starts at 16:30
Lecture
Mechanical properties and deformation mechanisms in alloys Hastelloy X and Haynes 214 for honeycomb liners

Sonun Ulan Kyzy Oliver Munz Tim Fischer Sarah Welzenbach Dr. Rainer Völkl Prof. Dr. Uwe Glatzel

S1/01 - A02
F01: High-Temperature Functional Materials
F01.3: Metallic High-Temperature Materials
Session starts at 16:30
Lecture
Microstructure evolution in Ni-containing Co-Re-Cr alloys and its effect on alloy properties

Katharina Esleben Dr. Bronislava Gorr Prof. Dr. Hans-Jürgen Christ Dr. Debashis Mukherji Prof. Dr. Joachim Rösler

S1/03 - 123
F04: Functional Materials for Energy Applications
F04.3: Session 3
Session starts at 16:30
Lecture
Determining defect concentrations from voltage and partial pressure dependent chemical capacitance measurements

Dipl.-Ing. Alexander Schmid Prof. Dr. Jürgen Fleig

S1/03 - 223
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.3: Session 3
Session starts at 16:30
Lecture
Pattern Formation during Current Sintering - Experiments

Claudia Gorynski Prof. Dr. Markus Winterer

S1/03 - 283
P02: Additive Manufacturing Technologies and Materials
P02.3: Processes
Session starts at 16:30
Lecture
Additive manufacturing of Low Temperature Co-fired Ceramic by DLP technology

Dr.-Ing. Elena Xuriguera Joana Gonçalves Pol Barcelona Dr. Jose A. Padilla Dr. Albert Cirera

S1/03 - 221
P07: Joining
P07.1: Session 1
Session starts at 16:30
Lecture
Study of a diffusion couple of pure Fe/Ti

Dr.-Ing. Aurelien Besnard Dr. Cotton Dominique

S1/03 - 23
S05: Bulk Ultrafine- and Nano-Structured Materials
S05.3: Thermal Effects and Magnetic Properties
Session starts at 16:30
Lecture
Magnetic Binary Supersaturated Solid Solutions processed by Severe Plastic Deformation

Dipl.-Ing. Martin Stückler Dr. Stefan Wurster Dr. Andrea Bachmaier

S1/01 - A3
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure
Session starts at 16:30
Lecture
Effect of macroalloying on microstructure and high temperature oxidation resistance of new refractory compositionally complex alloys

Franz Müller Dr. Bronislava Gorr Prof. Dr. Hans-Jürgen Christ Hans Chen Dr. Alexander Kauffmann Prof. Dr. Martin Heilmaier

S1/01 - A5
17:00
B05: Biomaterials Applications
B05.3: Session 3
Session starts at 16:30
Lecture
Synthesis of polymeric hydrogel coatings with an atmospheric pressure plasma jet for biomedical applications

Monique Levien Dr. Ihsan Amin Prof. Dr. Klaus-Dieter Weltmann Dr. Katja Fricke

S1/01 - A01
C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue
Session starts at 16:30
Highlight Lecture
Effect of sample size and grain boundaries on the dislocation structures and damage evolution: A micro-fatigue investigation

Dipl.-Ing. Jorge Rafael Velayarce Prof. Dr. Christian Motz

S1/01 - A03
C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.3: Session 3
Session starts at 16:30
Lecture
Creep deformation mechanisms in SX Co-base superalloys: Compositional changes at planar faults studied by means of TEM and APT

Malte Lenz Yolita Eggeler Dr. Julian Mueller Dr. Christopher Zenk Dr. Steffen Neumeier Prof. Dr. Peter Felfer Dr. Surendrar Makineni Dr. Baptiste Gault Prof. Dr. Mathias Göken Prof. Dr. Erdmann Spiecker

S1/01 - A02
F01: High-Temperature Functional Materials
F01.3: Metallic High-Temperature Materials
Session starts at 16:30
Lecture
Finite Element Simulation of the elastic anisotropic material behaviour of coarse-grained nickel base superalloys

Dipl.-Ing. Benedikt Engel Prof. Dr. Tilmann Beck

S1/03 - 123
F04: Functional Materials for Energy Applications
F04.3: Session 3
Session starts at 16:30
Lecture
Characterization and investigation of Fe:STO thin films prepared by pulsed laser deposition

Dipl.-Ing. Maximilian Morgenbesser Dr. Stefanie Taibl Dr. Markus Kubicek Alexander Viernstein Christopher Herzig Prof. Dr. Andreas Limbeck Prof. Dr. Jürgen Fleig

S1/03 - 223
M03: Microstructure Evolution in Applied Materials: Process to Property
M03.3: Polymers and Miscellaneous
Session starts at 16:30
Lecture
Numerical investigation of the pore evolution in polycrystalline fibers

Dr. Julia Kundin

S1/01 - A2
M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.3: Session 3
Session starts at 16:30
Lecture
Atomistic simulations of the deformation behavior of thin film structures

Dr. Aruna Prakash Aviral Vaid Dr. Hao Lyu Dr. Eva Preiß Dr. Benoit Merle Prof. Erik Bitzek

S1/01 - A4
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.3: Session 3
Session starts at 16:30
Lecture
Pattern formation during current sintering – Simulation

Lukas Engelke Prof. Dr. Dietrich E. Wolf

S1/03 - 283
P02: Additive Manufacturing Technologies and Materials
P02.3: Processes
Session starts at 16:30
Lecture
Additive manufacturing of soft magnetic materials and components

David Schuller Torsten Kunert Julian Schurr Tim Schubert Dr. Timo Bernthaler Prof. Dr. Harald Riegel Prof. Dr. Dagmar Goll Prof. Dr. Gerhard Schneider

S1/03 - 221
P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.3: Hybrid and Molecular Layer Deposition
Session starts at 16:30
Lecture
Atomic/molecular layer deposition of azobenzene-containing hybrid thin films with reversible photoresponsive behaviour

Dipl.-Ing. Aida Khayyami Prof. Maarit Karppinen

S1/03 - 226
P07: Joining
P07.1: Session 1
Session starts at 16:30
Lecture
Resistance Spot Welding of Aluminum-Steel Joints Using Modern Medium-Frequency Inverter Technique (MFDC)

Prof. Dr.-Ing. Mario Säglitz Dr. Dirk Berger Alexander Winkler Florian Kiss

S1/03 - 23
S05: Bulk Ultrafine- and Nano-Structured Materials
S05.3: Thermal Effects and Magnetic Properties
Session starts at 16:30
Highlight Lecture
Influence of annealing on microstructure and mechanical properties of ultrafine-grained Ti45Nb

Anton Hohenwarter Bernhard Völker

S1/01 - A3
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure
Session starts at 16:30
Lecture
Introducing a chip based µ-bulk setup for microscopic heat treatment studies of compositionally complex single crystal superalloys

Dorota Kubacka Yolita Eggeler Prof. Dr. Erdmann Spiecker

S1/01 - A5
S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.3: Properties of SPD Materials and Nanocomposites
Session starts at 16:30
Lecture
Mechanical and Structural behavior of Cu/Fe Nanocomposites produced by Accumulative Roll Bonding

Ph.D. Maher Ghanem Dr. Benoit Merle Prof. Dr. Heinz Werner Höppel Prof. Dr. Mathias Göken

S1/01 - A1
Z02: Networking-Symposium - International opportunities for young researchers
Z02.2: Session 2
Session starts at 16:30
Lecture
Be useful: Practical advice for leaving the ivory tower

Dr. Zach Evenson

17:15
B05: Biomaterials Applications
B05.3: Session 3
Session starts at 16:30
Lecture
Localized corrosion and cytotoxic effect of ASTM F745 in culture medium

Dr. Ricardo Gregorutti Prof. Jorge Grau Prof. Daniel Castrogiovanni Prof. Julieta Parisi Dr. Cecilia Elsner

S1/01 - A01
C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue
Session starts at 16:30
Lecture
Degradation of superelastic NiTi during uniaxial and multiaxial cyclic loading

Prof. Dr. Helena Van Swygenhoven Dr. Miroslav Smid Dr. Steven Van Petegem Dr. Efthymios Polatidis Wei-Neng Hsu

S1/01 - A03
C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.3: Session 3
Session starts at 16:30
Lecture
Microstructure Evolution of Niobium Rich Advanced Titanium Aluminide Alloy During Hot Compression

Bhavanish Kumar Singh V. Anil Kumar Dr. Rohit Kumar Gupta Dr. Anand Krishna Kanjarla

S1/01 - A02
F01: High-Temperature Functional Materials
F01.3: Metallic High-Temperature Materials
Session starts at 16:30
Lecture
Thermomechanical Induced Precipitation of Intermetallic Phase Particles in Ferritic Stainless Steels

Dipl.-Ing. Jana Pöpperlová Xiuru Fan Dr. Bernd Kuhn Prof. Wolfgang Bleck

S1/03 - 123
F04: Functional Materials for Energy Applications
F04.3: Session 3
Session starts at 16:30
Lecture
Oxygen isotope exchange on ceria: CO2 splitting in the temperature range between 300 and 900 °C

Daniel Uxa Dr. Lars Dörrer Dr. Peter Fielitz Prof. Dr. Günter Borchardt Dr. Stefan Beschnitt Nicole Knoblauch Prof. Dr. Martin Schmücker

S1/03 - 223
M03: Microstructure Evolution in Applied Materials: Process to Property
M03.3: Polymers and Miscellaneous
Session starts at 16:30
Lecture
Thermal energy storage in cement pastes containing microencapsulated phase change materials: a microstructural model analysis

Ph.D. Antonio Caggiano Christoph Mankel Prof. Dr. Eduardus A.B. Koenders

S1/01 - A2
M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.3: Session 3
Session starts at 16:30
Lecture
Atomic-Level Processes of Shear Band Nucleation in Metallic Glasses

Dr. Daniel Sopu Dr. Alexander Stukowski Dr. Mihai Stoica Dr. Sergio Scudino Prof. Dr. Jürgen Eckert

S1/01 - A4
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.3: Session 3
Session starts at 16:30
Lecture
Field Assisted Sintering of Rare Earth Doped Ceria (REDC)

Tarini Prasad Mishra Sree Koundinya Sistla Prof. Alexander Laptev Prof. Dr. Olivier Guillon Dr. Anke Kaletsch Prof. Dr. Christoph Broeckmann Dr. Martin Bram

S1/03 - 283
P02: Additive Manufacturing Technologies and Materials
P02.3: Processes
Session starts at 16:30
Lecture
Experimental analysis of laser post-processing of additive manufactured metallic parts

Juliana dos Santos Solheid Dr. Wilhelm Pfleging Prof. Dr. Hans Jürgen Seifert

S1/03 - 221
P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.3: Hybrid and Molecular Layer Deposition
Session starts at 16:30
Lecture
Search for Novel Inorganic-Organic Carboxylate Network Thin Film Structures by Atomic/Molecular Layer Deposition

Dipl.-Ing. Jenna Penttinen Dr. Mikko Nisula Prof. Maarit Karppinen

S1/03 - 226
P07: Joining
P07.1: Session 1
Session starts at 16:30
Lecture
Joining aluminium with copper for applications in electro mobility

Dr. Jörg Kaspar Andrea Ostwaldt Andreas Grimm Dr. Jens Standfuß Prof. Dr. Martina Zimmermann

S1/03 - 23
S05: Bulk Ultrafine- and Nano-Structured Materials
S05.3: Thermal Effects and Magnetic Properties
Session starts at 16:30
Lecture
Investigation of Phase Transformation and Grain Growth in Nanocrystalline Austenitic Stainless Steels Produced by High Energy Mechanical Alloying

Dr. Hasan Kotan Dr. Kris Darling

S1/01 - A3
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure
Session starts at 16:30
Lecture
Trace elements influencing the lattice parameters in the Al10Co25Cr8Fe15Ni36Ti6 compositionally complex alloy

Dr. Anna Manzoni Sebastian Haas Felix Dubois Christoph von Schlippenbach Cafer Tufan Cakir Prof. Dr. Marwan Mousa Prof. Dr. Uwe Glatzel Dr. Nelia Wanderka

S1/01 - A5
S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.3: Properties of SPD Materials and Nanocomposites
Session starts at 16:30
Highlight Lecture
Understanding plasticity of pearlitic nanolamellar structures through a simple material model

Ph.D. Jon Alkorta Dr. Peter De Jaeger Prof. José Manuel Martínez Esnaola Prof. Javier Gil Sevillano

S1/01 - A1
Z02: Networking-Symposium - International opportunities for young researchers
Z02.2: Session 2
Session starts at 16:30
Lecture
Bavarian Academic Center for Latin America (BAYLAT): Activities and funding opportunities

Dipl.-Pol. Luise Freitag

17:30
B05: Biomaterials Applications
B05.3: Session 3
Session starts at 16:30
Lecture
A new method for obtaining magnetic Bioactive glass 45S5® 3D scaffolds modified with nanoparticles of iron-loaded hydroxyapatite, characterization, and evaluation of its biocompatibility in different types of cells.

Dipl.-Ing. Maria Laura Dittler Dr. Gerhard Frank Irem Unalan Alina Grünewald Prof. Dr. Monica Gonzalez Prof. Dr. Aldo Boccaccini

S1/01 - A01
C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue
Session starts at 16:30
Lecture
Small scale fatigue crack growth and fracture: a case study in the nickelbase superalloy CMSX-4

Patrick Grünewald Florian Schäfer Dr. Michael Marx Prof. Dr. Christian Motz

S1/01 - A03
C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.3: Session 3
Session starts at 16:30
Lecture
SFB-TR-103: Interdisciplinary Scale Bridging Material Science of Co- and Ni-based Single Crystal Superalloys

Prof. Dr. Gunther Eggeler

S1/01 - A02
F01: High-Temperature Functional Materials
F01.3: Metallic High-Temperature Materials
Session starts at 16:30
Lecture
Oxidation behaviour of roughing mill work rolls and effect on thermomechanical fatigue

Kai Bläser Dr. Bronislava Gorr Prof. Dr. Hans-Jürgen Christ

S1/03 - 123
F04: Functional Materials for Energy Applications
F04.3: Session 3
Session starts at 16:30
Keynote Lecture
Ionic conductivity of acceptor doped sodium bismuth titanate (NBT): Influence of dopants, phase transitions and defect associates

Sebastian Steiner Leonie Koch Dr. Kai-Christian Meyer Dr. In-Tae Seo Prof. Dr. Karsten Albe Dr. Till Frömling

S1/03 - 223
M03: Microstructure Evolution in Applied Materials: Process to Property
M03.3: Polymers and Miscellaneous
Session starts at 16:30
Lecture
Self-organization of nanostructured morphologies in physical vapor deposited immiscible alloys

Rahul Raghavan Dr. Benyamin Gholami Bazehhour Prof. Dr. Kiran Solanki Prof. Dr. Kumar Ankit

S1/01 - A2
M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.3: Session 3
Session starts at 16:30
Lecture
Atomistic and mesoscale simulations of nanoindentation and nanoscratching of metals – A statistical approach to characterize discrete dislocation microstructures

Prof. Dr. Nina Gunkelmann Dr. Iyad Alabd Alhafez Dominik Steinberger Prof. Dr. Herbert Urbassek Prof. Dr. Stefan Sandfeld

S1/01 - A4
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.3: Session 3
Session starts at 16:30
Lecture
Grain growth in electric field: Influence of Defects, Space Charge and Atmosphere

Prof. Wolfgang Rheinheimer Jana P. Parras Cong Tao Prof. Dr. Christian Elsässer Prof. Dr. Roger A. De Souza Prof. Dr. Michael J. Hoffmann Jan-Helmut Preusker

S1/03 - 283
P02: Additive Manufacturing Technologies and Materials
P02.3: Processes
Session starts at 16:30
Lecture
In Situ and Real-Time Quality Monitoring of AM/Laser Process

Dr. Tri Le Quang Dr. Sergey Shevchik Dr. Bastian Meylan Dr. Margie Olbinado Dr. Alexander Rack Dr. Kilian Wasmer

S1/03 - 221
P05: Advances in Atomic Layer Deposition Technologies: Conformal Thin Films and Hybrid Materials for Energy, Electronics and Health
P05.3: Hybrid and Molecular Layer Deposition
Session starts at 16:30
Lecture
Simultaneous enhancement of toughness and elimination of the UV sensitivity of Kevlar with a combined ALD/MPI process

Ph.D. Itxasne Azpitarte Prof. Dr. Mato Knez

S1/03 - 226
P07: Joining
P07.1: Session 1
Session starts at 16:30
Lecture
Tailoring the thickness of intermetallic interfacial nanolayers by temperature control of FSW in Al-Cu lap joints

Roland Marstatt Markus Krutzlinger Johannes Luderschmid Prof. Dr. Michael F. Zäh Prof. Dr. Ferdinand Haider

S1/03 - 23
S05: Bulk Ultrafine- and Nano-Structured Materials
S05.3: Thermal Effects and Magnetic Properties
Session starts at 16:30
Lecture
Recrystallisation in K-doped and pure cold rolled tungsten (W) sheets: As-rolled condition and isochronal annealings (1 h)

Philipp Lied Carsten Bonnekoh Prof. Dr. Wolfgang Pantleon Dr. Andreas Hoffmann Dr. Jens Reiser

S1/01 - A3
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure
Session starts at 16:30
Lecture
Phase stability and solid solution strengthening in fcc high-entropy alloys investigated by a diffusion couple approach

Tom Christopher Keil Dr. Enrico Bruder Prof. Dr. Karsten Durst

S1/01 - A5
S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.3: Properties of SPD Materials and Nanocomposites
Session starts at 16:30
Highlight Lecture
Interaction of Hydrogen with SPD-induced Lattice Defects: Features and Properties

Prof. Dr. Michael Zehetbauer Peter Cengeri Wolfgang Reß Prof. Dr. Gerhard Krexner Prof. Dr. Erhard Schafler Dr. Daria Setman

S1/01 - A1
Z02: Networking-Symposium - International opportunities for young researchers
Z02.2: Session 2
Session starts at 16:30
Lecture
International acting in Materials Science and Engineering

Prof. Dr. Hans Jürgen Seifert

17:45
B05: Biomaterials Applications
B05.3: Session 3
Session starts at 16:30
Lecture
Novel strategy for immunoprotective islet macroencapsulation

Dr. Katarzyna Skrzypek Prof. Dimitrios Stamatialis

S1/01 - A01
C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue
Session starts at 16:30
Lecture
Dynamic Micro Testing Overcoming 5 Decades of Strain Rates

Dipl.-Ing. Frank Huberth

S1/01 - A03
C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.3: Session 3
Session starts at 16:30
Oral Poster
The Impact of Residual Stress on the Crack Growth Behavior in Martensitic Steels

Anna Wildeis Prof. Dr. Robert Brandt

S1/01 - A02
M03: Microstructure Evolution in Applied Materials: Process to Property
M03.3: Polymers and Miscellaneous
Session starts at 16:30
Lecture
The Generation of Random Surfaces by Means of Additive Manufacturing with respect to Offset-Issues

Kevin Noack Prof. Dr. Daniel Lordick

S1/01 - A2
M05: Plasticity Across the Scales – From Microstructure Changes to Bulk Mechanical Behavior
M05.3: Session 3
Session starts at 16:30
Lecture
Investigation of size effects on the plastic zone properties at crack tip

Ph.D. Riccardo Gatti Dr. Laurent Korzeczek Dr. Arjen Roos Dr. Benoit Devincre

S1/01 - A4
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.3: Session 3
Session starts at 16:30
Lecture
Improving efficiency and temperature distribution during field assisted sintering by advanced thermal insulation

Dr. Martin Bram Prof. Dr. Alexander Laptev Prof. Dr. Kim Vanmeensel Prof. Dr. Jesus Gonzalez-Julian Prof. Dr. Olivier Guillon

S1/03 - 283
P02: Additive Manufacturing Technologies and Materials
P02.3: Processes
Session starts at 16:30
Oral Poster
Shaping, debinding and sintering as a low cost additive manufacturing method of solid metal

Yvonne Thompson Prof. Peter Felfer Dr. Christian Kukla Dr. Joamin Gonzalez - Gutierrez

S1/03 - 221
P07: Joining
P07.1: Session 1
Session starts at 16:30
Lecture
Nano-soldering pseudo-composite material to decrease engine bearing failure

Dr.-Ing. Paul-Cristian Olaru

S1/03 - 23
S05: Bulk Ultrafine- and Nano-Structured Materials
S05.3: Thermal Effects and Magnetic Properties
Session starts at 16:30
Lecture
Structural analysis and magnetic properties of Fe-Co-Ag and Fe-Co-Cu alloys processed by severe plastic deformation

Dr. Andrea Bachmaier Dr. Stefan Wurster Mirjam Spuller Martin Stückler

S1/01 - A3
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure
Session starts at 16:30
Lecture
Priority Programme (SPP2006) Compositionally Complex Alloys - High Entropy Alloys (CCA - HEA)

Prof. Dr. Uwe Glatzel Dr. Anna Manzoni Dr. Bronislava Gorr

S1/01 - A5
S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.3: Properties of SPD Materials and Nanocomposites
Session starts at 16:30
Lecture
Grain structure and mechanical properties of the commercially pure copper and Cu-Al hybrid materials processed by the High Pressure Torsion Extrusion

Dayan Nugmanov Dr. Roman Kulagin Dr. Yulia Ivanisenko Prof. Dr. Horst Hahn

S1/01 - A1

Thursday (27.09.2018)

09:15
B06: Biomaterials for Bone Substitution and Regeneration
B06.1: Session 1
Session starts at 09:15
Lecture
Influence of Ca and B incorporation on the network architecture and bioactivity of SiOC-based glasses

Fangtong Xie Dr. Isabel Gonzalo de Juan Dr. Emanuel Ionescu Prof. Dr. Aldo R. Boccaccini

S1/03 - 23
C02: Going 3D: From Image to Knowledge
C02.1: Session 1
Session starts at 09:15
Keynote Lecture
Development of 3D tomogprahy holder for tensile deformation of soft materials

Prof. Hiroshi Jinnai

S1/01 - A04
C05: Small Scale and In Situ Mechanical Testing
C05.4: Fracture II & Indentation I
Session starts at 09:15
Keynote Lecture
Nanoindentation methods for fracture toughness measurement at the micron scale

Dr. Marco Sebastiani

S1/01 - A03
F02: Surface Engineering and Functionalisation
F02.1: Wear and Friction Reduction
Session starts at 09:15
Highlight Lecture
Laser-applied high performance tribological coatings on light weight materials

Dr. Anna Buling Jörg Zerrer

S1/03 - 123
F04: Functional Materials for Energy Applications
F04.4: Session 4
Session starts at 09:15
Highlight Lecture
A phase-field model for multi-grain and multi-crystal ferroelectric materials

Dipl.-Ing. Walter Werner Dr. Daniel Schneider Dr. Manuel Hinterstein Dr. Gunnar Picht Prof. Dr. Britta Nestler

S1/03 - 223
F06: Materials Design for Electrochemical Energy Storage
F06.1: Electrode Microstructure
Session starts at 09:15
Lecture
Effect of particle size and hierarchical structuring on the electrochemical properties of NCM-cathode materials in lithium-ion-batteries

Dr. Amalia Wagner Dr. Joachim R. Binder Nicole Bohn

S1/03 - 221
M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.1: Iron-Base and Steel Systems
Session starts at 09:15
Lecture
Ab initio and CALPHAD guided design of materials for nuclear fuel cladding applications

Prof. Dr. Keke Chang

S1/01 - A01
M02: Atomistic Methods for Designing
M02.1: Bulk Materials, Nanoparticles and Thin Films
Session starts at 09:15
Lecture
Stacking fault energies of CrMnFeCoNi-based high entropy alloys from ab initio

Dr. Yuji Ikeda Dr. Fritz Körmann Prof. Dr. Jörg Neugebauer

S1/01 - A2
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.4: Session 4
Session starts at 09:15
Lecture
Fine-tuning low-temperature response of the FeCoCrMnNi high-entropy alloy by field-assisted cooling

Dr. Martin Friak Dr. Oldřich Schneeweiss Dr. Marie Dudová Prof. David Holec Prof. Dr. Mojmír Šob Dr. Dominik Kriegner Prof. Dr. Václav Holý Dr. Přemysl Beran Prof. Dr. Easo-P. George Prof. Dr. Jörg Neugebauer Prof. Dr. Antonín Dlouhý

S1/03 - 283
P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.1: Session 1
Session starts at 09:15
Keynote Lecture
Stoichiometry control and 2D compositional patterning of oxide thin films by magnetron sputtering at oblique angles

Prof. Dr. Augustin R. González-Elipe Aurelio García-Valenzuela Dr. Rafael Alvarez-Molina Prof. Juan Pedro Espinós Dr. Victor Rico Prof. Javier Solis Dr. Alberto Palmero

S1/03 - 226
S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.1: Process-Microstructure-Property Relations in AM Metals I
Session starts at 09:15
Highlight Lecture
Processing glass-forming alloys by selective laser melting

Dr.-Ing. Simon Pauly Liang Deng Dr. Uta Kühn

S1/01 - A3
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.4: Towards Application
Session starts at 09:15
Keynote Lecture
On the Fracture Behavior of TRIP, TWIP and Dual-Phase High-Entropy Alloys

Dr. Bernd Gludovatz Hyun Seok Oh Prof. Eun Soo Park Prof. Robert Ritchie

S1/01 - A5
S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.4: Fatigue and Failure
Session starts at 09:15
Keynote Lecture
Cyclic deformation and fatigue lives of ultrafine-/nanograined materials

Prof. Dr. Hael Mughrabi

S1/01 - A1
Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.1: Session Z01 - Ch. S. P. Brühl and A. R. Boccaccini
Session starts at 09:15
Lecture
Materials Characterization by Diffraction Techniques. X-rays, Neutrons, Synchrotron Radiation and EBSD: A Critical Assessment of their Capabilities and Relative Advantages.

Prof. Dr. Raúl Bolmaro Dr. Martina Avalos Prof. Dr. Heinz-Gunter Brokmeier

S1/01 - A02
09:30
B06: Biomaterials for Bone Substitution and Regeneration
B06.1: Session 1
Session starts at 09:15
Lecture
Innovative and Highly-Sustainable Bread-Derived Bioactive Glass Scaffolds for Bone Tissue Engineering

Ph.D. Elisa Fiume Dr. Francesco Baino Prof. Enrica Verné

S1/03 - 23
F02: Surface Engineering and Functionalisation
F02.1: Wear and Friction Reduction
Session starts at 09:15
Lecture
High speed surface functionalization employing Direct Laser Interference Patterning – Basic principles, industrial approaches and structure lifetime

Dr. Tim Kunze Benjamin Krupop Sabri Alamri Tobias Steege Alfredo Aguilar Mikhael El-Khoury Sophie Trautewig Florian Rößler Andrés Fabián Lasagni

S1/03 - 123
F04: Functional Materials for Energy Applications
F04.4: Session 4
Session starts at 09:15
Lecture
The Role of defects and internal stresses on tuning the multifunctional properties of Metamagnetic Shape Memory Alloys

Prof. Fernando Plazaola I. Unzueta J. Lopez-Garcia Dr. V. Sanchez-Alarcos Dr. V. Recarte Dr. J. I. Perez-Landazabal J. A. Rodríguez-Velamazán Dr. J. J. S. Garitaonandia Prof. J. A. Garcia

S1/03 - 223
F06: Materials Design for Electrochemical Energy Storage
F06.1: Electrode Microstructure
Session starts at 09:15
Lecture
A Novel Method for a Detailed 3D Reconstruction of Lithium-Ion Battery Anodes

Dr. Jochen Joos Dr. André Weber Remco Geurts Steven Randolph Renae Gannon Dr. Herman Lemmens Prof. Ellen Ivers-Tiffée

S1/03 - 221
M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.1: Iron-Base and Steel Systems
Session starts at 09:15
Lecture
Thermodynamic description of alpha-Fe-C under non-hydrostatic stress

Prof. Dr. Andreas Leineweber

S1/01 - A01
M02: Atomistic Methods for Designing
M02.1: Bulk Materials, Nanoparticles and Thin Films
Session starts at 09:15
Lecture
Atom packing Changes of TiAl Alloy Nanoparticles during Heating and Coalescence by Molecular Dynamics Method

Dr. Lin Zhang

S1/01 - A2
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.4: Session 4
Session starts at 09:15
Lecture
Magnetic Field Assisted Chemical Vapor Deposition: A Feasible Method for the Formation of Anisotropically Grown Magnetic Structures

Daniel Stadler Danny Bialuschewski Dr. Thomas Fischer Prof. Dr. Sanjay Mathur

S1/03 - 283
S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.1: Process-Microstructure-Property Relations in AM Metals I
Session starts at 09:15
Lecture
Ultrafine Fe-Fe2Ti eutectics produced by laser metal deposition: processing and characterization

Angelos Theofilatos Georg Rödler Dr. Jan Haubrich Prof. Dr. Guillermo Requena Dr. Ulrike Hecht Dr. Romuald Laqua Dr. Andreas Weisheit Dr. Federico Sket Dr. Srdjan Milenkovic Prof. Dr. László Gránásy Dr. Tamás Pusztai László Rátkai

S1/01 - A3
Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.1: Session Z01 - Ch. S. P. Brühl and A. R. Boccaccini
Session starts at 09:15
Lecture
Fatigue cracks analysis in high-strength bainitic steel.

Prof. Dr. María Cecilia Marinelli Dr. Marcela Balbi Prof. Dr. Ulrich Krupp

S1/01 - A02
09:45
B06: Biomaterials for Bone Substitution and Regeneration
B06.1: Session 1
Session starts at 09:15
Lecture
Microstructure Engineering to Control the Degradation Rate in Biocompatible Mg -Zn-Ca-Zr Alloy

Dr. Fernando Warchomicka Klemens Holzleitner Prof. Dr. Christof Sommitsch Dipl.-Ing. Fatemeh Iranshahi

S1/03 - 23
C02: Going 3D: From Image to Knowledge
C02.1: Session 1
Session starts at 09:15
Lecture
High-resolution X-ray nano-tomography for non-destructive imaging of porous materials and nanocomposites

Dr. Juliana Martins de Souza e Silva Prof. Martin Steinhart Prof. Ralf B. Wehrspohn

S1/01 - A04
F02: Surface Engineering and Functionalisation
F02.1: Wear and Friction Reduction
Session starts at 09:15
Lecture
Surface functionalization of sheet metals for lubricant free deep drawing processes

Theresa Jähnig Seyed Ali Mousavi Valentin Lang Dr. Tim Kunze Prof. Dr. Andrés Fabian Lasagni

S1/03 - 123
F04: Functional Materials for Energy Applications
F04.4: Session 4
Session starts at 09:15
Lecture
Magnetocaloric effect associated to the arrested austenite in Ni-Mn-In-Co alloys

Dr. J. Inaki Pérez-Landazábal Dr. Vicente Recarte Dr. Vicente Sánchez-Alarcos J. Jesús Beato Dr. J. Alberto Rodríguez-Velamazán Dr. Jorge Sánchez-Marcos Dr. Cristina Gómez-Polo Dr. Eduard Cesari

S1/03 - 223
F06: Materials Design for Electrochemical Energy Storage
F06.1: Electrode Microstructure
Session starts at 09:15
Lecture
Multiscale 3D imaging of hierarchically structured energy materials

Markus Osenberg Dr. André Hilger Matthias Neumann Dr. Amalia Wagner Nicole Bohn Dr. Joachim R. Binder Prof. Dr. Volker Schmidt Dr. Ingo Manke Prof. Dr. John Banhart

S1/03 - 221
M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.1: Iron-Base and Steel Systems
Session starts at 09:15
Lecture
Phase-field simulation of quenching and partitioning in a polycrystalline Fe-C system under constrained carbon-equilibrium condition

Prince Gideon Kubendran Amos Ephraim Schoof Nick Streichan Dr. Daniel Schneider Prof. Dr. Britta Nestler

S1/01 - A01
M02: Atomistic Methods for Designing
M02.1: Bulk Materials, Nanoparticles and Thin Films
Session starts at 09:15
Lecture
Structural and elasticity properties of β/βo and α'/α2' phases in Ti-Al-Mo alloys: towards or- dering transitions

Neda Abdoshahi Mohammad Dehghani Andrei Ruban Prof. Dr. Svea Mayer Jürgen Spitaler Dr. David Holec Petra Erdely Michael Musi

S1/01 - A2
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.4: Session 4
Session starts at 09:15
Lecture
Manipulation of material properties of Al2O3 and SiO2 thin films by substrate biasing in plasma enhanced atomic layer deposition

Vivek Beladiya Tahsin Faraz Prof. Dr. Erwin Kessels Prof. Dr. Andreas Tünnermann Dr. Adriana Szeghalmi

S1/03 - 283
P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.1: Session 1
Session starts at 09:15
Lecture
Ag-based binary alloy nanorods as SERS substrate by GLAD

Prof. Zhenjun Zhang

S1/03 - 226
S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.1: Process-Microstructure-Property Relations in AM Metals I
Session starts at 09:15
Lecture
Precipitation kinetics during non-linear heat treatment in Laser Additive Manufacturing

Priyanshu Bajaj Dr. Eric Jägle Prof. Dr. Dierk Raabe

S1/01 - A3
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.4: Towards Application
Session starts at 09:15
Lecture
High-temperature strength of modified Compositionally Complex Alloy Al10Co25Cr8Fe15Ni36Ti6 (in at.%)

Dipl.-Ing. Sebastian Haas Dr. Anna Manzoni Prof. Dr. Uwe Glatzel

S1/01 - A5
S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.4: Fatigue and Failure
Session starts at 09:15
Lecture
What we can learn from hr-ebsd about crack closure effects during fatigue crack propagation

Marc Laub Matthias Thielen Florian Schäfer Dr. Michael Marx Prof. Dr. Christian Motz

S1/01 - A1
Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.1: Session Z01 - Ch. S. P. Brühl and A. R. Boccaccini
Session starts at 09:15
Lecture
Influence of the stress-induced martensite on the corrosion behavior of a β CuAlBe shape memory alloy

Prof. Dr. Silvia Simison Dr. Susana Montecinos Dr. Martin Sláma Dr. Petr Klímek Dr. Sebastián Suarez

S1/01 - A02
10:00
B06: Biomaterials for Bone Substitution and Regeneration
B06.1: Session 1
Session starts at 09:15
Lecture
Cyclic deformation characteristics of binary Ti-Nb alloys for hard tissue replacement

André Reck Stefan Pilz Martin Kuczyk Dr. Annett Gebert Prof. Dr. Martina Zimmermann

S1/03 - 23
C02: Going 3D: From Image to Knowledge
C02.1: Session 1
Session starts at 09:15
Lecture
Quantitative 3D structure analysis of supported catalysts at the nanoscale

Wu Wang Dr. Di Wang Dr. Alberto Villa Prof. Dr. Horst Hahn Dr. Christian Kübel

S1/01 - A04
C05: Small Scale and In Situ Mechanical Testing
C05.4: Fracture II & Indentation I
Session starts at 09:15
Lecture
Study on the embrittlement of flash annealed Fe85.2B9.5P4Cu0.8Si0.5 metallic glass ribbons

Christian Minnert Markus Kuhnt Sebastian Bruns Amalraj Marshal Dr. Konda Gokuldoss Pradeep Dr. Mie Marsilius Dr. Enrico Bruder Prof. Dr. Karsten Durst

S1/01 - A03
F02: Surface Engineering and Functionalisation
F02.1: Wear and Friction Reduction
Session starts at 09:15
Lecture
Fatigue performance of DLC multi-layer coatings on steel substrate under three-point bending loading

Florian Hengsbach Dr. Kay-Peter Hoyer Prof. Dr. Mirko Schaper

S1/03 - 123
F04: Functional Materials for Energy Applications
F04.4: Session 4
Session starts at 09:15
Lecture
Anelastic and magnetic behaviour in Fe and Fe-Al alloy produced by electrodeposition from an ionic liquid

Dr. Bernd Weidenfeller Prof. Dr. Osvaldo Agustin Lambri Dr. Federico Guillermo Bonifacich Dr. Giridhar Pulletikurthi Jiayi Xu Laura Weidenfeller Prof. Dr. Frank Endres

S1/03 - 223
F06: Materials Design for Electrochemical Energy Storage
F06.1: Electrode Microstructure
Session starts at 09:15
Lecture
Multiscale Characterization of Li-Ion Battery Electrodes with Correlative Electron- and X-Ray Tomography

Dr. Laura Almar Dr. Jochen Joos Janina Costard Dr. André Weber Prof. Dr. Ellen Ivers-Tiffée

S1/03 - 221
M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.1: Iron-Base and Steel Systems
Session starts at 09:15
Lecture
In situ determination of the ferrite grain size evolution during the cyclic austenite-ferrite phase transformation in low-alloyed steels by three-dimensional neutron depolarization

Ph.D. Haixing Fang Prof. Dr. Sybrand van der Zwaag Dr. Niels van Dijk

S1/01 - A01
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.4: Session 4
Session starts at 09:15
Lecture
Effect of DC current on creep behavior of 8Y-CSZ polycrystals

Dr. Koji Morita Dr. Hidehiro Yoshida Dr. Byung-Nam Kim Dr. Keijiro Hiraga Dr. Yoshio Sakka

S1/03 - 283
P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.1: Session 1
Session starts at 09:15
Lecture
Spatial Analysis of Nanostructured Au-Ag Alloys as SERS Substrates towards Increased Performance and Shelf Life

Chanunthorn Chananonnawathorn Dr. Mati Horprathum Dr. Pitak Eiamchai Saksorn Limwichean Viyapol Patthanasettakul Dr. Noppadon Nuntawong Dr. Hideki Nakajima Dr. Prayoon Songsiriritthigul Songsiriritthigul

S1/03 - 226
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.4: Towards Application
Session starts at 09:15
Lecture
Microstructure-Functional Behavior-Relationships in High Entropy Shape Memory Alloys

Christian Hinte Maike Hermann David Poirunek Dr. Jan Frenzel Dr. Gregory Gerstein Dr. Mark Alan Swider Prof. Georgiy Sergeevich Firstov Prof. Gunther Eggeler

S1/01 - A5
S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.4: Fatigue and Failure
Session starts at 09:15
Lecture
Resistance to fatigue crack propagation in the near-threshold region in metals

Dr. Tomas Vojtek

S1/01 - A1
Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.1: Session Z01 - Ch. S. P. Brühl and A. R. Boccaccini
Session starts at 09:15
Lecture
Multiphase Characterization of sellected isopleths of Cu-In-Sn system for Pb-free TLPB

Prof. Dr. Silvana Sommadossi Dr. Paula Alonso Dr. Diego Lamas Dr. Suzana Fries Silvana Tumminello

S1/01 - A02
10:15
B06: Biomaterials for Bone Substitution and Regeneration
B06.1: Session 1
Session starts at 09:15
Lecture
Magnesium-based implants in an osteoporotic rat model

Dr. Nicholas Donohue Dr. Daniela Hirzberger Prof. Dr. Annelie-Martina Weinberg Ph.D. Nicole Grün

S1/03 - 23
C02: Going 3D: From Image to Knowledge
C02.1: Session 1
Session starts at 09:15
Lecture
High resolution FIB nanotomography of nanoporous Au nanoparticles

Hauke Honig Prof. Dr. Peter Schaaf Dr. Dong Wang

S1/01 - A04
C05: Small Scale and In Situ Mechanical Testing
C05.4: Fracture II & Indentation I
Session starts at 09:15
Lecture
Anneal hardening and high temperature strain rate sensitivity of nanostructured metals and their relation to intergranular dislocation accommodation

Dr. Oliver Renk Dr. Verena Maier-Kiener Prof. Dr. Daniel Kiener Prof. Dr. Reinhard Pippan

S1/01 - A03
F02: Surface Engineering and Functionalisation
F02.1: Wear and Friction Reduction
Session starts at 09:15
Lecture
Influence of film formation preference by Direct Laser interference Patterning on Roller bearings

Chia-Jui Hsu Prof. Dr. Carsten Gachot Andreas Stratmann

S1/03 - 123
F04: Functional Materials for Energy Applications
F04.4: Session 4
Session starts at 09:15
Lecture
Influence of thermal treatments on the martensitic transformation in NiMnSb ferromagnetic shape memory alloys. Its relation to the magnetocaloric effect.

Prof. Dr. Osvaldo Lambri Dr. Federico Bonifacich Prof. Dr. Gerardo Rubiolo Dr. Pedro Ferreiros Dr. Griselda Zelada

S1/03 - 223
F06: Materials Design for Electrochemical Energy Storage
F06.1: Electrode Microstructure
Session starts at 09:15
Lecture
Virtual materials design for the 3D microstructure of lithium-ion battery electrodes

Daniel Westhoff Dr. Ingo Manke Prof. Dr. Volker Schmidt

S1/03 - 221
M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.1: Iron-Base and Steel Systems
Session starts at 09:15
Lecture
Effect of Si on the Kinetic Stabilization of ε-Fe3(C,N)1+x in Nitrided Fe-C-Si White Cast Iron

Stefan Kante Prof. Dr. Andreas Leineweber

S1/01 - A01
M02: Atomistic Methods for Designing
M02.1: Bulk Materials, Nanoparticles and Thin Films
Session starts at 09:15
Lecture
Crystallization processes in bicomponent thin film depositions: towards a realistic Kinetic Monte-Carlo simulation

Dr. Diego Martinez-Martinez Prof. Dr. Carmelo Herdes Prof. Dr. Lourdes Vega

S1/01 - A2
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.4: Session 4
Session starts at 09:15
Lecture
Electro-plastic deformation studies of Al-Cu eutectic alloys

Doreen Andre Matthias Obot Dr. Stefanie Sandlöbes Prof. Dr. Sandra Korte-Kerzel

S1/03 - 283
P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.1: Session 1
Session starts at 09:15
Lecture
lndium Tin Oxide thin films deposited by Glancing Angle Deposition technique: Experimental and modelling of the anisotropic optical and electrical properties

Prof. Fabien Paumier Prof. Simon Hurand Dr. Bertrand lacroix Dr. Florian Maudet Dr. Antonio J. Santos Dr. Cyril Dupeyrat Dr. Maxime Paraillous Dr. Alan Corvisier Prof. Rafael Garcia Prof. Francisco M. Morales Prof. Thierry Girardeau

S1/03 - 226
S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.1: Process-Microstructure-Property Relations in AM Metals I
Session starts at 09:15
Lecture
Processing of high-strength C+N austenitic steel by selective laser melting - microstructure and properties

Johannes Boes Prof. Dr. Werner Theisen Dr. Arne Röttger

S1/01 - A3
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.4: Towards Application
Session starts at 09:15
Lecture
Laser Metal Deposition of Al12Co22Cr22Fe22Ni22: microstructure and texture effects on tensile properties

Oleg Stryzhyboroda Dr. Ulrike Hecht Markus Benjamin Wilms Dr. Lorenz Gerke

S1/01 - A5
S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.4: Fatigue and Failure
Session starts at 09:15
Lecture
Enhanced Cyclic Mechanical Properties in Ultrafine-Grained Laminated Metal Composites by Interface Engineering

Frank Kümmel Benedikt Diepold Christopher Schunk Dr. Aruna Prakash Dr. Heinz Werner Höppel Prof. Dr. Mathias Göken

S1/01 - A1
Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.1: Session Z01 - Ch. S. P. Brühl and A. R. Boccaccini
Session starts at 09:15
Lecture
Potential of Photocurrent Improvement in µc-Si:H Solar Cells using ZnO:B coated Substrates Structured by Direct Laser Interference Patterning

Dr. Marcos Soldera Prof. Dr. Kurt Taretto Dr. Jana Berger Prof. Dr. Andres-Fabian Lasagni

S1/01 - A02
10:30
B06: Biomaterials for Bone Substitution and Regeneration
B06.1: Session 1
Session starts at 09:15
Lecture
treating femoral chondrosarcoma with high mechanical performances bio-hybrid bone graft: a case report

Prof. Dr. Giuseppe Perale Dr. Raimondo Piana Dr. Michele Boffano Dr. Pietro Pellegrino Dr. Nicola Ratto Dr. Laura Rossi

S1/03 - 23
C02: Going 3D: From Image to Knowledge
C02.1: Session 1
Session starts at 09:15
Highlight Lecture
Cryo-FIB Tomography of Soft-Matter Functional Materials

Dr. Chandra Macauley Martina Heller Gabriel Sievi Dr. Markus Stähler Prof. Dr. Peter Wasserscheid Prof. Dr. Peter Felfer

S1/01 - A04
C05: Small Scale and In Situ Mechanical Testing
C05.4: Fracture II & Indentation I
Session starts at 09:15
Lecture
Transient deformation behavior during rate-jump nanoindentation testing of glasses

René Limbach Dr. Bruno Poletto Rodrigues Prof. Dr. Lothar Wondraczek

S1/01 - A03
F02: Surface Engineering and Functionalisation
F02.1: Wear and Friction Reduction
Session starts at 09:15
Lecture
In-situ XRD during Ion Implantation and Ion Etching of Austenitic Stainless Steel

Dr. Darina Manova Dr. Stephan Mändl

S1/03 - 123
F04: Functional Materials for Energy Applications
F04.4: Session 4
Session starts at 09:15
Lecture
Characterization of BaCe0.4Zr0.4Y0.2O3-δ Protonic Conductor in-operando conditions

Dr.-Ing. Catalina Jiménez Dr. Juan Basbus Dr. Mauricio Arce Dr. Federico Napolitano Dr. Martin Saleta Prof. Dr. Nikolas Bonanos Dr. Jose Alonso Dr. Maria Teresa Fernández Díaz Prof. Dr. Lars Giebeler Prof. Dr. Alberto Caneiro Prof. Dr. Adriana Serquis Prof. Dr. Liliana Mogni

S1/03 - 223
F06: Materials Design for Electrochemical Energy Storage
F06.1: Electrode Microstructure
Session starts at 09:15
Lecture
Virtual design of thick electrodes for Li-Ion batteries

Dr.-Ing. Timo Danner Simon Hein Daniel Westhoff Benedikt Prifling Prof. Dr. Volker Schmidt Prof. Dr. Arnulf Latz

S1/03 - 221
M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.1: Iron-Base and Steel Systems
Session starts at 09:15
Lecture
Phase equilibria in the Al-Cr-Fe ternary system: experimental study and thermodynamic calculations

Maximilian Rank Dr. Peter Franke Prof. Dr. Hans Jürgen Seifert

S1/01 - A01
M02: Atomistic Methods for Designing
M02.1: Bulk Materials, Nanoparticles and Thin Films
Session starts at 09:15
Lecture
Tailoring thermoelectric transport properties of two-dimensional materials

Ph.D. Leonardo Medrano Sandonas Dr. Rafael Gutierrez Dr. Alessandro Pecchia Dr. Arezoo Dianat Dr. Alexander Croy Prof. Dr. Gianaurelio Cuniberti

S1/01 - A2
P01: Manipulation of Matter by Electric and Magnetic Fields
P01.4: Session 4
Session starts at 09:15
Lecture
Experimental investigation of the electro plastic effect in polycrystalline pure Mg and WE 43 alloy

Dr. Abhishek Tripathi Andrej Dalinger Dr. Gregory Gerstein Dr. Abhishek Tripathi Dr. Stefan Zaefferer Franz Körkemeyer

S1/03 - 283
P11: Thin Film Formation and Nano Structuring Through the Control of Geometry and Deposition Parameters
P11.1: Session 1
Session starts at 09:15
Lecture
Electrical anisotropy enhancement in W-Cu based columnar films

Ph.D. Raya El Beainou Dr. Roland SALUT Dr. Laurent ROBERT Jean-Marc COTE Dr. Valérie POTIN Prof. Dr. Nicolas MARTIN

S1/03 - 226
S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.1: Process-Microstructure-Property Relations in AM Metals I
Session starts at 09:15
Lecture
High-Manganese Steels for Additive Manufacturing Applications with Energy Absorption Functionality

Patrick Köhnen Fabian Kies Simon Ewald Maximilian Voshage Prof. Dr. Johannes Heinrich Schleifenbaum Dr. Christian Haase

S1/01 - A3
S06: Compositionally Complex Alloys – High Entropy Alloys
S06.4: Towards Application
Session starts at 09:15
Lecture
First results on thermal stability and mechanical behaviour of CrFeCoNi equiatomic compositionally complex alloy thin films on silicon and sapphire

Maya Katapadi Kini Wenjun Lu Alan Savan Bladine Courtois Younes Addab Benjamin Breitbach Dominique Chatain Alfred Ludwig Nathalie Bozzolo Christian Liebscher Christina Scheu Christoph Kirchlechner Gerhard Dehm

S1/01 - A5
S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.4: Fatigue and Failure
Session starts at 09:15
Lecture
Strategy of multiple crack deflection at tailored interfaces for damage tolerant materials

Prof. Dr. Rostislav Daniel Michael Meindlhumer Dr. Jakub Zalesak Bernhard Sartory Prof. Dr. Christian Mitterer Prof. Dr. Jozef Keckes

S1/01 - A1
Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.1: Session Z01 - Ch. S. P. Brühl and A. R. Boccaccini
Session starts at 09:15
Lecture
Multiscale homogenization scheme for transport phenomena in cement-based composites under self-healing conditions

Dipl.-Ing. Felipe Lopez Rivarola Prof. Dr. Guillermo Etse Prof. Dr. Paula Folino Prof. Dr. Eduardus Koenders Dr. Antonio Caggiano Dr. Diego Said Schicchi

S1/01 - A02