To view the poster program please click here

Back to overview

Results: 75

Program filtered by:
EBSD  

Wednesday (26.09.2018)

11:00
Lecture C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI
Session starts at 10:45
Defect Characterisation in MnAl-C Using EBSD and ECCI

Dr. Thomas George Woodcock Dr. Stefan Zaefferer

S1/01 - A04
11:15
Lecture C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI
Session starts at 10:45
Advanced high-resolution 3D EBSD

Tobias Volkenandt Dr. Fabián Pérez-Willard Dr. Michael Rauscher

S1/01 - A04
11:30
Lecture S06: Compositionally Complex Alloys – High Entropy Alloys
S06.1: Concerning the Cantor Alloy S06: Compositionally Complex Alloys – High Entropy Alloys
S06.1: Concerning the Cantor Alloy
Session starts at 10:45
Additive Manufacturing of CoCrFeMnNi Cantor alloy: Influence of the synthesis route on structure and properties

Dr. Jörg Kaspar Dr. Liliana Kotte Dr. Junhee Han Martin Kuczyk Sören Thieme Dr. Denis Beitelschmidt Prof. Dr. Martina Zimmermann Prof. Dr. Cristoph Leyens

S1/01 - A5
11:45
Lecture C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI
Session starts at 10:45
Comparison of the Current Methods of Parent Austenite Reconstruction from Martensite Orientation Maps

Dr. Tuomo Nyyssönen Dr. Matti Isakov Prof. Veli-Tapani Kuokkala Prof. Pasi Peura

S1/01 - A04
12:00
Oral Poster C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI
Session starts at 10:45
Development of oxide scales in low carbon steel wire rods

Prof. Dr. Martina Cecilia Avalos Prof. Dr. Elena Brandaleze Mariela Melia Prof. Dr. Raul Bolmaro

S1/01 - A04
Lecture C05: Small Scale and In Situ Mechanical Testing
C05.1: Fracture I C05: Small Scale and In Situ Mechanical Testing
C05.1: Fracture I
Session starts at 10:45
In-situ study of a crack initiation mechanism in the aluminum alloy 7475-T7351

Prof. Dr. Miroslav Piska Dr. Petra OHNISTOVA Dr. Jiri Dluhos Dr. Martin PETRENEC

S1/01 - A03
Lecture S05: Bulk Ultrafine- and Nano-Structured Materials
S05.1: Processing and Mechanical Properties S05: Bulk Ultrafine- and Nano-Structured Materials
S05.1: Processing and Mechanical Properties
Session starts at 10:45
Properties of iron after large and severe plastic deformation – Application potential for precursors to ultrafine grained microstructures

Dr. Enrico Bruder

S1/01 - A3
12:03
Oral Poster C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.1: EBSD, TKD, PED-TEM, ECCI
Session starts at 10:45
Electron Back-Scatter Diffraction Studies of the Microstructure of a Cold Rolled Interstitial Free Steel Guided by Synchrotron X-Ray Diffraction

Prof. Dr. Raúl Bolmaro Emanuel Benatti Dr. Natalia De Vincentis Dr. Martina Avalos Prof. Dr. Heinz-Gunter Brokmeier Dr. Norbert Schell

S1/01 - A04
14:30
Lecture S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms
Session starts at 14:30
Abnormal grain growth mediated by fractal boundary migration at the nanoscale

Dr. Christian Braun Raphael Zeller Hanadi Menzel Nils Boussard Jörg Schmauch Prof. Carl E. Krill III Prof. Dr. Rainer Birringer

S1/01 - A3
Highlight Lecture C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30
Automated calibration of the atom probe tomography reconstructions with electron microscopy

Shyam Katnagallu Dr. Surendra Makineni Dr. Oana Cojocaru-Mirédin Dr. Torsten Schwarz Prof. Dierk Raabe Dr. Baptiste Gault Dr. Isabelle Mouton

S1/01 - A04
Lecture M03: Microstructure Evolution in Applied Materials: Process to Property
M03.2: Chemo-Mechanical Coupling in Metals M03: Microstructure Evolution in Applied Materials: Process to Property
M03.2: Chemo-Mechanical Coupling in Metals
Session starts at 14:30
Bainitic transformation for press hardening applications: A multiscale FE-MPF coupled approach

Mingxuan Lin Dr. Diego Said Schicchi Dr. Martin Hunkel Prof. Dr. Ulrich Prahl

S1/01 - A2
Keynote Lecture C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.2: Session 2 C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.2: Session 2
Session starts at 14:30
Strain localizations during cyclic deformation investigated by high-resolution digital image correlation

Dr.-Ing. Anja Weidner Prof. Horst Biermann

S1/01 - A02
14:45
Lecture C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30
Correlative high-resolution characterization of strengthening effects in the Ni-based superalloy Inconel 718

Felix Theska Prof. Simon P. Ringer Dr. Sophie Primig

S1/01 - A04
15:00
Lecture C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30
Electromagnetic field measurements of needle-shaped specimens

Fengshan Zheng Dr. Vadim Migunov Dr. Jan Caron Prof. Dr. Giulio Pozzi Prof. Dr. Rafal E Dunin-Borkowski

S1/01 - A04
15:15
Lecture S06: Compositionally Complex Alloys – High Entropy Alloys
S06.2: Basics and Overviews S06: Compositionally Complex Alloys – High Entropy Alloys
S06.2: Basics and Overviews
Session starts at 14:30
Combining Thermodynamic Modeling and Additive Manufacturing for High-Throughput Screening of Compositionally Complex Alloys

Fabian Kies Dr. Bengt Hallstedt Dr. Christian Haase

S1/01 - A5
Lecture C05: Small Scale and In Situ Mechanical Testing
C05.2: In-Situ Small Scale Testing C05: Small Scale and In Situ Mechanical Testing
C05.2: In-Situ Small Scale Testing
Session starts at 14:30
In-situ study of recrystallization and deformation processes in non-toxic free cutting steel

Jirí Dluhoš Tomáš Babinský Antoine Candeias Dr. Martin Petrenec

S1/01 - A03
Highlight Lecture C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30
Long-range ordered nanoscale domains in an Fe-Co-Mo Maraging steel, an atom probe microscopy and neutron diffraction study

Dr. Sophie Primig Felix Theska Dr. Christoph Turk Dr. Anna Ceguerra Prof. Simon Ringer

S1/01 - A04
Highlight Lecture S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms
Session starts at 14:30
Observation of Grain Boundary Sliding in an Ultrafine Grained Ferrite Steel

Laura Ahmels Dr. Enrico Bruder

S1/01 - A3
15:30
Lecture C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30
Correlative electron microscopy and atom probe tomography investigations on solute segregations to planar faults in crept Co based superalloys

Dr. Surendra Kumar Makineni Dr. Junyang He Malte Lenz Prof. Erdmann Spiecker Prof. Dierk Raabe Dr. Baptiste Gault Ankit Kumar

S1/01 - A04
15:45
Lecture S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms S05: Bulk Ultrafine- and Nano-Structured Materials
S05.2: Deformation Behavior and Mechanisms
Session starts at 14:30
Ductilisation of tungsten (W) through cold-rolling: Mechanisms of plastic deformation in cold rolled, ultrafine-grained tungsten sheets

Simon Bonk Dr. Andreas Hoffmann Dr. Jan Hoffmann Ute Jäntsch Dr. Michael Klimenkov Dr. Jens Reiser

S1/01 - A3
Oral Poster C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30
Oxygen deficiency evolution in defect-engineered epitaxial SrMnO3 thin films

Hongguang Wang Dr. Vesna Srot Dr. Yi Wang Dr. Hans Boscker Prof. Dr. Jochen Mannhart Prof. Dr. Peter van Aken

S1/01 - A04
15:48
Oral Poster C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
C07.2: Orientation Image Microscopy and Atom Probe Tomography
Session starts at 14:30
Solute-dislocation interactions investigated by correlative microscopy combining Atom Probe and (Scanning) Transmission Electron Microscopy

Ph.D. Florian Chabanais

S1/01 - A04
16:45
Lecture C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.3: Session 3 C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.3: Session 3
Session starts at 16:30
Mechanical properties and deformation mechanisms in alloys Hastelloy X and Haynes 214 for honeycomb liners

Sonun Ulan Kyzy Oliver Munz Tim Fischer Sarah Welzenbach Dr. Rainer Völkl Prof. Dr. Uwe Glatzel

S1/01 - A02
Lecture C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue
Session starts at 16:30
The role of room temperature grain coarsening on initiation of fatigue damage in thin metal films

Dr. Oleksandr Glushko

S1/01 - A03
17:00
Lecture S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.3: Properties of SPD Materials and Nanocomposites S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.3: Properties of SPD Materials and Nanocomposites
Session starts at 16:30
Mechanical and Structural behavior of Cu/Fe Nanocomposites produced by Accumulative Roll Bonding

Ph.D. Maher Ghanem Dr. Benoit Merle Prof. Dr. Heinz Werner Höppel Prof. Dr. Mathias Göken

S1/01 - A1
17:15
Lecture C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue C05: Small Scale and In Situ Mechanical Testing
C05.3: Fatigue
Session starts at 16:30
Degradation of superelastic NiTi during uniaxial and multiaxial cyclic loading

Prof. Dr. Helena Van Swygenhoven Dr. Miroslav Smid Dr. Steven Van Petegem Dr. Efthymios Polatidis Wei-Neng Hsu

S1/01 - A03
Lecture C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.3: Session 3 C09: Mechanical Processing and Deformation Induced Microstructural Evolution, Damage Mechanisms and Failure Characterization from Micro to Macro Imaging
C09.3: Session 3
Session starts at 16:30
Microstructure Evolution of Niobium Rich Advanced Titanium Aluminide Alloy During Hot Compression

Bhavanish Kumar Singh V. Anil Kumar Dr. Rohit Kumar Gupta Dr. Anand Krishna Kanjarla

S1/01 - A02
17:30
Lecture S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure S06: Compositionally Complex Alloys – High Entropy Alloys
S06.3: Microstructure
Session starts at 16:30
Phase stability and solid solution strengthening in fcc high-entropy alloys investigated by a diffusion couple approach

Tom Christopher Keil Dr. Enrico Bruder Prof. Dr. Karsten Durst

S1/01 - A5
Lecture S05: Bulk Ultrafine- and Nano-Structured Materials
S05.3: Thermal Effects and Magnetic Properties S05: Bulk Ultrafine- and Nano-Structured Materials
S05.3: Thermal Effects and Magnetic Properties
Session starts at 16:30
Recrystallisation in K-doped and pure cold rolled tungsten (W) sheets: As-rolled condition and isochronal annealings (1 h)

Philipp Lied Carsten Bonnekoh Prof. Dr. Wolfgang Pantleon Dr. Andreas Hoffmann Dr. Jens Reiser

S1/01 - A3

Thursday (27.09.2018)

9:30
Lecture Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.1: Session Z01 - Ch. S. P. Brühl and A. R. Boccaccini Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.1: Session Z01 - Ch. S. P. Brühl and A. R. Boccaccini
Session starts at 09:15
Fatigue cracks analysis in high-strength bainitic steel.

Prof. Dr. María Cecilia Marinelli Dr. Marcela Balbi Prof. Dr. Ulrich Krupp

S1/01 - A02
9:45
Lecture Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.1: Session Z01 - Ch. S. P. Brühl and A. R. Boccaccini Z01: Argentinean-German Collaboration in Materials Science and Engineering
Z01.1: Session Z01 - Ch. S. P. Brühl and A. R. Boccaccini
Session starts at 09:15
Influence of the stress-induced martensite on the corrosion behavior of a β CuAlBe shape memory alloy

Prof. Dr. Silvia Simison Dr. Susana Montecinos Dr. Martin Sláma Dr. Petr Klímek Dr. Sebastián Suarez

S1/01 - A02
10:15
Lecture S06: Compositionally Complex Alloys – High Entropy Alloys
S06.4: Towards Application S06: Compositionally Complex Alloys – High Entropy Alloys
S06.4: Towards Application
Session starts at 09:15
Laser Metal Deposition of Al12Co22Cr22Fe22Ni22: microstructure and texture effects on tensile properties

Oleg Stryzhyboroda Dr. Ulrike Hecht Markus Benjamin Wilms Dr. Lorenz Gerke

S1/01 - A5
10:30
Lecture S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.1: Process-Microstructure-Property Relations in AM Metals I S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.1: Process-Microstructure-Property Relations in AM Metals I
Session starts at 09:15
High-Manganese Steels for Additive Manufacturing Applications with Energy Absorption Functionality

Patrick Köhnen Fabian Kies Simon Ewald Maximilian Voshage Prof. Dr. Johannes Heinrich Schleifenbaum Dr. Christian Haase

S1/01 - A3
11:45
Lecture C05: Small Scale and In Situ Mechanical Testing
C05.5: Indentation II C05: Small Scale and In Situ Mechanical Testing
C05.5: Indentation II
Session starts at 11:15
Nanomechanical mapping for individual phase performance as a function of environment

Dr. Ude Dirk Hangen Dr. Eric Hintsala Dr. Douglas Stauffer

S1/01 - A03
12:00
Lecture S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.5: Mechanical Properties of Tungsten S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.5: Mechanical Properties of Tungsten
Session starts at 11:15
Thermal stability of warm-rolled tungsten in the temperature range from 1150 °C to 1300 °C

Dipl.-Ing. Umberto Maria Ciucani Dr. Wolfgang Pantleon

S1/01 - A1
12:15
Lecture C02: Going 3D: From Image to Knowledge
C02.2: Session 2 C02: Going 3D: From Image to Knowledge
C02.2: Session 2
Session starts at 11:15
3D characterization of dendritic microstructures and the evolution of crystal mosaicity in Ni-base superalloys

Felicitas Scholz Daniel Kotzem Mustafa Cevik Pascal Thome Prof. Dr. Jürgen Schreuer Prof. Dr. Ingo Steinbach Dr. Jan Frenzel Prof. Dr. Gunther Eggeler

S1/01 - A04
Lecture S08: Advanced Steels
S08.1: INCROHSS Seminar: Intercritical Rolling of High Strength Steels S08: Advanced Steels
S08.1: INCROHSS Seminar: Intercritical Rolling of High Strength Steels
Session starts at 11:15
Analysis of the microstructural evolution of a intercritically deformed NbV microalloyed steel

Dr.-Ing. Nerea Isasti Gordobil Unai Mayo Ijurra Dr. Pello Uranga Zuaznabar Prof. Dr. Jose María Rodriguez Ibabe

S1/01 - A4
Lecture S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.2: Process-Microstructure-Property Relations in AM Metals II S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
S03.2: Process-Microstructure-Property Relations in AM Metals II
Session starts at 11:15
Micro-mechanical modelling of additively manufactured 316L stainless steel using selective laser melting

Abhishek Biswas Mahesh Prasad Dr. Napat Vajragupta Dr. Hamad ul Hassan Florian Brenne Prof. Dr. Thomas Niendorf Prof. Dr. Alexander Hartmaier

S1/01 - A3
12:30
Lecture S08: Advanced Steels
S08.1: INCROHSS Seminar: Intercritical Rolling of High Strength Steels S08: Advanced Steels
S08.1: INCROHSS Seminar: Intercritical Rolling of High Strength Steels
Session starts at 11:15
Texture evolutions in heavy gauge steel plates after inter-critical rolling at high temperatures

Dr. Minh Tuan Nguyen Dr. Matteo Caruso Dr. Ulrike Lorenz Prof. Dr. Jilt Sietsma Prof. Dr. Roumen Petrov

S1/01 - A4
Lecture M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.2: Key Ternary Systems M01: Computational and Experimental Thermodynamics and Kinetics of Materials
M01.2: Key Ternary Systems
Session starts at 11:15
Thermodynamics and Microstructure of Liquid-Phase-Sintered Molybdenum

Andrea Huber Prof. Dr. Lorenz Sigl Dr. Bernhard Tabernig Prof. Dr. Bernd Kieback

S1/01 - A01
14:45
Keynote Lecture S08: Advanced Steels
S08.2: Stainless Steels S08: Advanced Steels
S08.2: Stainless Steels
Session starts at 14:45
Initial microstructure effect on surface relief and fatigue crack initiation in a high strength ferritic-martensitic steel.

Prof. Dr. Iris Alvarez Dr. Maria Natalia Batista Dr. Maria Cecilia Marinelli

S1/01 - A4
15:30
Lecture P08: Damage in Metal Forming
P08.2: Session 2 P08: Damage in Metal Forming
P08.2: Session 2
Session starts at 14:45
Damage characterization and modelling of a dual-phase steel during plastic deformation under different stress states, temperatures and strain rates

Wenqi Liu Dr. Junhe Lian Prof. Dr. Sebastian Münstermann

S1/03 - 283
Lecture F02: Surface Engineering and Functionalisation
F02.3: Corrosion and Wear Protection Control F02: Surface Engineering and Functionalisation
F02.3: Corrosion and Wear Protection Control
Session starts at 14:45
γ’-Fe4N variants on α-Fe substrates grown by gaseous nitriding

Dipl.-Ing. Helge Schumann Dr. Gunther Richter Prof. Dr. Andreas Leineweber

S1/03 - 123
15:45
Keynote Lecture S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.6: Micromechanics S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.6: Micromechanics
Session starts at 14:45
Mechanical Properties of Materials and Devices at the Microscale under Extreme Conditions of High and Low Temperatures and High Strain Rates

Dr. Johann Michler

S1/01 - A1
16:09
Oral Poster P08: Damage in Metal Forming
P08.2: Session 2 P08: Damage in Metal Forming
P08.2: Session 2
Session starts at 14:45
Microscale study of forming induced physical mechanisms in 16MnCrS5 steel

Anthony Dunlap Dr. Anke Aretz Dr. Alexander Schwedt Oliver Hering

S1/03 - 283
17:30
Lecture S08: Advanced Steels
S08.3: Processing, Microstructure and Mechanical Properties S08: Advanced Steels
S08.3: Processing, Microstructure and Mechanical Properties
Session starts at 16:45
Additive Manufacturing of Advanced High-Strength Steels

Dr.-Ing. Christian Haase Fabian Kies Patrick Köhnen Dr. Andreas Weisheit Prof. Dr. Johannes Henrich Schleifenbaum

S1/01 - A4
Lecture F02: Surface Engineering and Functionalisation
F02.4: Sensors and Wetting Control F02: Surface Engineering and Functionalisation
F02.4: Sensors and Wetting Control
Session starts at 16:45
Tin oxide disproportionation on nanostructured silicon surfaces

Dr. Vladimir Sivakov Dr. Sergey Turishchev

S1/03 - 123
18:00
Keynote Lecture C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.3: Session 3 C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.3: Session 3
Session starts at 18:00
Multi-modal and multi-length scale imaging of hierarchical biological materials - bioinspiration, microscopy, and correlative imaging

Dr. Richard Johnston Dr. Cameron Pleydell-Pearce Dr. Ria Mitchell Laura North Dr. Mark Coleman Peter Davies Dr. David Labonte Dr. Michelle Oyen Rachel Board Imogen Woodhead

S1/01 - A02
18:15
Lecture S08: Advanced Steels
S08.4: Processing, Microstructure and Mechanical Properties II S08: Advanced Steels
S08.4: Processing, Microstructure and Mechanical Properties II
Session starts at 18:00
On phase transformations of high-alloy CrMnNi steels at high pressures up to 20 GPa

Dr.-Ing. Anja Weidner Prof. Horst Biermann Carl Wolf Robert Lehnert Dr. Sebastian Henkel Dr. Stefan Martin Dr. Christian Schimpf Prof. David Rafaja Dr. Marcus R. Schwarz Dr. Christian Lathe Dr. Robert Farla

S1/01 - A4
18:30
Keynote Lecture S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.8: Special Session on Light Weight Metals S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.8: Special Session on Light Weight Metals
Session starts at 18:00
Metal-Al Matrix Nanocomposites

Prof. Dr. Fernando Audebert Prof. Marina Galano

S1/01 - A1
Lecture S08: Advanced Steels
S08.4: Processing, Microstructure and Mechanical Properties II S08: Advanced Steels
S08.4: Processing, Microstructure and Mechanical Properties II
Session starts at 18:00
Micromechanical modeling of DP600 steel: from microstructure to the sheet metal forming process

Dr.-Ing. Napat Vajragupta Sascha Maassen Dr. Dominik Brands Dr. Till Clausmeyer Prof. Dr. Jörg Schröder Prof. Dr. Alexander Hartmaier

S1/01 - A4
18:45
Lecture F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.4: Properties of Interfaces F10: Interfaces in Microstructural Evolution: Structure, Properties, Anisotropy and Modelling
F10.4: Properties of Interfaces
Session starts at 18:00
Ferroelectric Twin-Domains in Methylammonium Lead Iodide Thin-Film Solar Cells

Tobias Leonhard Holger Röhm Alexander Schulz Fabian Altermann Dr. Susanne Wagner Dr. Wolfgang Rheinheimer Prof. Dr. Michael J. Hoffmann Dr. Alexander Colsmann

S1/03 - 223

Friday (28.09.2018)

9:30
Lecture S08: Advanced Steels
S08.5: Low Carbon and Microalloyed Steels S08: Advanced Steels
S08.5: Low Carbon and Microalloyed Steels
Session starts at 09:15
New fine grained temper-resistant long products

Radoslaw Rozmus Prof. Dr. Roman Kuziak Linda Oberli Dr. Hans Roelofs

S1/01 - A4
10:00
Lecture S08: Advanced Steels
S08.5: Low Carbon and Microalloyed Steels S08: Advanced Steels
S08.5: Low Carbon and Microalloyed Steels
Session starts at 09:15
Investigation of the influence of nickel on the microstructure of low-alloyed steels.

Dipl.-Ing. Lucía Campo Dr. Bastian Philippi Dr. Agustina Guitar Dominik Britz Prof. Dr. Frank Mücklich

S1/01 - A4
11:30
Lecture S08: Advanced Steels
S08.6: High Alloy Steels S08: Advanced Steels
S08.6: High Alloy Steels
Session starts at 11:15
How austenitic TRIP steels accommodate strain under multiaxial loading: the effect of stacking fault energy and deformation state.

Dr. Efthymios Polatidis Dr. Miroslav Smid Wei-Neng Hsu Dr. Tobias Panzner Prof. Helena Van Swygenhoven

S1/01 - A4
11:45
Lecture S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.10: Mechanical Properties of Advanced Steels S07: Mechanical Behavior of Advanced Structural Materials - Reinhard Pippan Honorary Symposium
S07.10: Mechanical Properties of Advanced Steels
Session starts at 11:15
Microstructural design for performance tailoring in high chromium cast irons

Dr.-Ing. Maria Agustina Guitar Lucia Campo Dominik Britz Prof. Dr. Frank Mücklich

S1/01 - A1
12:15
Lecture S01: Environmentally Assisted Cracking of High-Strength Alloys
S01.2: Hydrogen Embrittlement in Corrosion Resistant and High Entropy Alloys S01: Environmentally Assisted Cracking of High-Strength Alloys
S01.2: Hydrogen Embrittlement in Corrosion Resistant and High Entropy Alloys
Session starts at 11:15
Sensitivity of different crystal orientations and grain boundaries to the hydrogen assisted degradation

Dr. Mohammad Zamanzade Christian Müller Patrick Fernschild Telesphore Guegang Prof. Dr. Christian Motz

S1/01 - A2
12:30
Lecture S01: Environmentally Assisted Cracking of High-Strength Alloys
S01.2: Hydrogen Embrittlement in Corrosion Resistant and High Entropy Alloys S01: Environmentally Assisted Cracking of High-Strength Alloys
S01.2: Hydrogen Embrittlement in Corrosion Resistant and High Entropy Alloys
Session starts at 11:15
Multiscale analysis of hydrogen-induced intergranular failure in a compositionally complex FeNiCoCrMn FCC solid solution alloy

Dr. Kaila Bertsch Dr. Kelly Nygren Dr. Shuai Wang Dr. Hongbin Bei Dr. Akihide Nagao Dr. Ian Robertson

S1/01 - A2
Lecture S08: Advanced Steels
S08.6: High Alloy Steels S08: Advanced Steels
S08.6: High Alloy Steels
Session starts at 11:15
Towards the source of the impact toughness scattering in the ductile-brittle transition temperature range in ferritic steels

Dipl.-Ing. Konstantin Vorkachev Dr. Matvey Matveevich Kantor

S1/01 - A4
12:39
Oral Poster M04: Predicting Interface Structure and Dynamics – From Atomic- to Meso-Scale
M04.3: Grain Boundaries II M04: Predicting Interface Structure and Dynamics – From Atomic- to Meso-Scale
M04.3: Grain Boundaries II
Session starts at 11:15
Mesoscopic Varistor Modelling

Kyle Taylor Dr. Erion Gjonaj

S1/01 - A5
14:45
Lecture S08: Advanced Steels
S08.7: Medium and High Manganese Steels S08: Advanced Steels
S08.7: Medium and High Manganese Steels
Session starts at 14:45
Microstructure and mechanical properties of cold-rolled medium-Mn steel Fe-12Mn-3Al-0.05C

Yan Ma Dr. Wenwen Song Prof. Dr. Wolfgang Bleck

S1/01 - A4
15:15
Lecture S08: Advanced Steels
S08.7: Medium and High Manganese Steels S08: Advanced Steels
S08.7: Medium and High Manganese Steels
Session starts at 14:45
Impact of Deformation Twinning and Short-Range Ordering on Serrated Flow in High-Manganese TWIP Steels

Simon Sevsek Prof. Dr. Wolfgang Bleck

S1/01 - A4
15:30
Lecture C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.6: Session 6 C04: In-Situ Techniques and Advanced Microscopy for High Resolution and Multi Scale Characterization of Materials
C04.6: Session 6
Session starts at 14:45
In-situ crack growth observation and advanced characterization of the fracture process zone in an environmental scanning electron microscope

Di Wan Prof. Dr. Afrooz Barnoush

S1/01 - A02
15:45
Lecture S08: Advanced Steels
S08.7: Medium and High Manganese Steels S08: Advanced Steels
S08.7: Medium and High Manganese Steels
Session starts at 14:45
Insight into hydrogen embrittlement on medium-manganese steel via in-situ electrochemical nanoindentation test

Xu Lu Dong Wang Dr. Wenwen Song Prof. Dr. Afrooz Barnoush Yan Ma

S1/01 - A4
16:09
Oral Poster P10: Wet Processing of Nanostructured Materials
P10.3: Anisotropic Nanoparticle Assemblies and Supraparticles P10: Wet Processing of Nanostructured Materials
P10.3: Anisotropic Nanoparticle Assemblies and Supraparticles
Session starts at 14:45
Self-organized plasmonic metals formation in limited volume matrixes

Dr. Vladimir Sivakov Dr. Egor Kaniukov Dr. Liubov Osminkina

S1/03 - 223
16:15
Lecture S08: Advanced Steels
S08.7: Medium and High Manganese Steels S08: Advanced Steels
S08.7: Medium and High Manganese Steels
Session starts at 14:45
Air-hardened, martensitic forging steels with medium manganese content

Alexander Roald Michael Gramlich Tobias Schmiedl Prof. Dr. Tobias Melz Prof. Dr. Wolfgang Bleck

S1/01 - A4

Poster C07: Orientation Image Microscopy: The Evolution. EBSD, TKD, PED-TEM, ECCI + Correlation with APT
Session starts at 09:30
Characterization of Crystallographic Properties in the α→γ’ martensitic transformation in a Fe-Mn-Al-Ni system by EBSD

Prof. Dr. Martina Cecilia Avalos Juan Manuel Vallejos Dr. Cesar Enrique Sobrero Prof. Dr. Walter Javier Signorelli Prof. Dr. Jorge Alberto Malarría

Poster S08: Advanced Steels
Session starts at 09:30
Cold drawing impact in high strength and plasticity of ultra-high carbon steel wires

Dipl.-Ing. Mykhaylo Romanyuk Prof. Dr. Elena Brandaleze

Poster S01: Environmentally Assisted Cracking of High-Strength Alloys
Session starts at 09:30
Hydrogen-assisted fatigue crack propagation in a ferritic alloy

Di Wan Dr. Antonio Alvaro Prof. Dr. Afrooz Barnoush

Poster S01: Environmentally Assisted Cracking of High-Strength Alloys
Session starts at 09:30
Hydrogen-induced cracking resolved by in-situ tensile test on Ni-based super alloys

Xu Lu Dong Wang Prof. Dr. Afrooz Barnoush

Poster P07: Joining
Session starts at 09:30
Multilayer characterization of Inconel-718 and Ni couples with Al in TLPB process

Prof. Dr. Silvana Sommadossi Mariana Poliserpi Prof. Dr. Roberto Boeri Prof. Dr. Cecilia Poletti

Poster S01: Environmentally Assisted Cracking of High-Strength Alloys
Session starts at 09:30
Preserving the surface integrity at nano-scale during small scale in-situ electrochmical testing

Tarlan Hajilou Prof. Afrooz Barnoush

Poster S03: Process-Microstructure-Property Relationships in High-Performance Alloys Produced by Additive Manufacturing
Session starts at 09:30
Resource efficient production of large-volume aviation structural parts

Daniel Elitzer Dr.-Ing. Heinz Werner Höppel Prof. Dr. Mathias Göken Daniel Baier Fuchs Christina Heinz Bähr Dr. Thomas Meyer Andreas Gallasch

Poster Z01: Argentinean-German Collaboration in Materials Science and Engineering
Session starts at 09:30
Tensile deformation mechanism of TRIP and TWIP Steels vs strain rate studied ex-situ by EBSD and in-situ by XRD

Dr.-Ing. Catalina Jiménez Mauro Martin

Poster C02: Going 3D: From Image to Knowledge
Session starts at 09:30
The Interaction of Twin Boundaries with Magnetic Domain Walls in MnAl-C Studied by Combined EBSD and Micromagnetic Modelling Techniques

Ph.D. Panpan Zhao Dr. Thomas George Woodcock Prof. Thomas Schrefl Dr. Markus Gusenbauer Prof. Kornelius Nielsch

reset

Search

(all)
Date
Search

© Deutsche Gesellschaft für Materialkunde e.V. Impressum   Privacy Statement   AGB